Zebra Technologies Corporation P430I-MIFARE 사용자 설명서
980470-001 Rev. A
P430i User’s Manual
25
3
Printing a Card
Printing with the P430i Card Printer is similar to printing with any other printer in a Windows environment.
• The Printer Driver Software is installed on your computer (see Chapter 2).
• The P430i Printer is connected to the power source and the computer (see Chapter 2).
• The P430i Printer is selected by either the Operating System or the appropriate application software
• The P430i Printer is connected to the power source and the computer (see Chapter 2).
• The P430i Printer is selected by either the Operating System or the appropriate application software
program.
• Printer Properties are set (the factory default values will be appropriate for many applications).
• Card printing is directed by the appropriate application software program.
• Card printing is directed by the appropriate application software program.
Setting Printer Properties
Printer Properties can be set either at the Operating System level or within the application software program
used for printing cards.
used for printing cards.
Preferences settings can configure the P430i Card Printer for Landscape (wide) or Portrait (tall) printing
orientation, and allow the user to verify that the desired ribbon is installed in the printer. (Monochrome ribbons
are selected via the drop-down menu.)
orientation, and allow the user to verify that the desired ribbon is installed in the printer. (Monochrome ribbons
are selected via the drop-down menu.)
If the P430i Printer includes the optional magnetic card stripe encoder, encoding parameters and coercivity can
be set.
be set.
Printer cleaning can be initiated from the Tools window (printer cleaning can also be initiated at the printer; see
Chapter 4).
Chapter 4).
Also from the Tools window, the Test Card can be selected from several pre-loaded styles.
Note •
In the following description of setting Printer Properties, only those properties and
options that are suitable for being set by the User are described. The User should not make
selections or set parameters unless they are specifically described in this section
selections or set parameters unless they are specifically described in this section