Zebra Technologies Corporation RFID-M2HF 사용자 설명서
109
Routine Maintenance
Clean the Exterior
12/2/05
XiIIIPlus/R110Xi/R170Xi User Guide
13383L-002 Rev. A
Clean the Exterior
Clean the outside surfaces of the printer with a lint-free cloth. Use a mild detergent solution or
desktop cleaner sparingly, as needed.
desktop cleaner sparingly, as needed.
Clean the Media Compartment
After every four rolls of media, inspect the media compartment. Use a soft bristle brush or a
vacuum cleaner to remove any dirt and lint from the interior of the printer.
vacuum cleaner to remove any dirt and lint from the interior of the printer.
Clean the Printhead and Platen Roller
After every roll of ribbon, clean the printhead. Clean the printhead more often if you see
inconsistent print quality, such as voids in the bar code or graphics.
inconsistent print quality, such as voids in the bar code or graphics.
For 200 and 300 dpi printers Clean after every roll (1500 feet or 450 m) of thermal
transfer ribbon or after every roll (500 feet or 150 m) of direct thermal labels or when
transfer ribbon or after every roll (500 feet or 150 m) of direct thermal labels or when
CLEAN
HEAD NOW
appears on the LCD.
For 600 dpi printers Clean after each roll (500 feet or 150 m) of labels or when
CLEAN
HEAD NOW
appears on the LCD.
Caution •
Do not use harsh or abrasive cleaning agents or solvents.
Note •
You do not need to turn off the printer before cleaning the printhead. If power is
turned off, all label formats and images, as well as any temporarily saved parameter settings
stored in the printer’s internal memory, are lost. When power is turned back on, these items
must be reloaded.
If power is removed from a 600 dpi printer when cleaning the printhead, the
stored in the printer’s internal memory, are lost. When power is turned back on, these items
must be reloaded.
If power is removed from a 600 dpi printer when cleaning the printhead, the
CLEAN HEAD NOW
warning shown on the LCD will not disappear.
If print quality does not improve after you perform this procedure, clean the printhead with
Save-a-Printhead cleaning film. This specially coated material removes contamination
buildup without damaging the printhead. Call your authorized Zebra reseller or distributor
for more information.
Save-a-Printhead cleaning film. This specially coated material removes contamination
buildup without damaging the printhead. Call your authorized Zebra reseller or distributor
for more information.