Zebra Technologies Corporation RFID-M4E-01 사용자 설명서
Printer Setup
Unpack and Inspect the Printer
23063L-003 Rev. A
6/24/05
R110Xi/R170Xi User Guide
9
Unpack and Inspect the Printer
When you unpack the printer, save all packing materials. When the printer is out of the box,
raise the printer’s media door, and remove the power cord.
raise the printer’s media door, and remove the power cord.
Inspect the printer for possible damage incurred during shipment. Check all exterior surfaces
for damage. Raise the media door, and inspect the media compartment for damage to
components.
for damage. Raise the media door, and inspect the media compartment for damage to
components.
Report Shipping Damage
If you discover shipping damage upon inspection:
•
Immediately notify the shipping company of the damage, and file a damage report with
them. Zebra is not responsible for any damage incurred during shipment of the equipment
and does not repair this damage under warranty.
them. Zebra is not responsible for any damage incurred during shipment of the equipment
and does not repair this damage under warranty.
•
Keep all packaging material for shipping company inspection.
•
Notify your authorized Zebra reseller.
Store or Reship the Printer
If you are not placing the printer into immediate operation, repackage it using the original
packing materials. You may store the printer under the following conditions:
packing materials. You may store the printer under the following conditions:
•
Temperature: –40° to 140°F (–40° to 60°C)
•
Relative humidity: 5% to 85% non-condensing
If you must ship the printer, remove any ribbon and media from the supply spools to avoid
damaging the printer. Carefully pack the printer into the original container or a suitable
alternate container to avoid damage during transit.
damaging the printer. Carefully pack the printer into the original container or a suitable
alternate container to avoid damage during transit.