ZyXEL Communications Corporation B320 사용자 설명서

 

 

ZyAIR Wireless LAN Utility  

Using the ZyAIR Utility 

 

2-13 

Passphrase  When you select the Create with Passphrase option, enter the passphrase. As 

you enter the passphrase, the ZyAIR automatically generates four different 
WEP keys and displays them in the key fields below. Write down the 
automatically generated WEP keys in and use them to manually set the WEP 
keys in other WLAN adapters.  
The passphrase is case-sensitive. You must use the same passphrase for all 
wireless LAN adapters with this feature in the same WLAN.  

Manual Entry 

Select this option if you want to manually enter the WEP keys. Then select a 
default WEP key to use for data encryption. 

Key Type  Select either the HEX or ASCII WEP key type.  

Key 1 … 4  Enter the WEP keys in the fields provided. 

If you select 64 Bits in the Encryption field.  

 

Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” 
(e.g. 11AA22BB33) for HEX key type 

 or  

 

Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and 
“0-9” (e.g. MyKey) for ASCII key type. 

 
If you select 128 Bits in the Encryption field,  

 

Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” 
(for example, 00112233445566778899AABBCC) for HEX key type 

 or  

 

Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” 
and “0-9” (for example, MyKey12345678) for ASCII key type. 

You must configure all four WEP keys the first time you 

Restore Default 

Click Restore Default to reset all fields back to factory default values.  

Undo Changes 

Click Undo Changes to start configuring the fields again. 

Apply Changes  

Click Apply Changes to save the changes back to ZyAIR.  

OK 

Click OK to save all changes and close the ZyAIR Utility.  

Cancel  

Click Cancel to discard changes and close the ZyAIR Utility.