ZyXEL Communications Corporation IX280P 사용자 설명서

Chapter 6 The WIFI Configuration Screen

MAX-207HW2R User’s Guide

The following table describes the labels in this screen.

Select No Security in the Security Mode field to allow wireless devices to 
communicate with the access points without any data encryption. 

Table 15   Advanced > WIFI Configuration > General

Wireless Setup
Active 
Wireless LAN 

Click the check box to activate wireless LAN.

Network 
Name (SSID) 

The SSID (Service Set IDentity) identifies the service set with which a 
wireless device is associated. Wireless devices associating to the access 
point (AP) must have the same SSID. Enter a descriptive name (up to 32 
printable 7-bit ASCII characters) for the wireless LAN. 

Note: If you are configuring the MAX-207HW2R from a computer 

connected to the wireless LAN and you change the MAX-
207HW2R’s SSID or WEP settings, you will lose your wireless 
connection when you press Apply to confirm. You must then 
change the wireless settings of your computer to match the 
MAX-207HW2R’s new settings.

Hide SSID 

Select this check box to hide the SSID in the outgoing beacon frame so a 
station cannot obtain the SSID through scanning using a site survey tool.

Security
Channel 
Selection 

Select this option and set the operating frequency/channel depending on 
your particular region. Select a channel from the drop-down list box. 

Security 
Mode 

See the following sections for more details about this field.

Apply

Click Apply to save your changes back to the MAX-207HW2R.

Reset 

Click to restore your previously saved settings.

Advanced 
Setup

Click Advanced Setup to display the Wireless Advanced Setup screen 
and edit more details of your WLAN setup.