ZyXEL Communications Corporation IX280P 사용자 설명서
Chapter 14 The Remote Management Screens
MAX-207HW2R User’s Guide
137
TCP/IP protocol suite. Your MAX-207HW2R supports SNMP agent functionality,
which allows a manager station to manage and monitor the MAX-207HW2R
through the network. The MAX-207HW2R supports SNMP version one (SNMPv1)
and version two (SNMPv2). The next figure illustrates an SNMP management
operation.
which allows a manager station to manage and monitor the MAX-207HW2R
through the network. The MAX-207HW2R supports SNMP version one (SNMPv1)
and version two (SNMPv2). The next figure illustrates an SNMP management
operation.
Note: SNMP is only available if TCP/IP is configured.
14.2 WWW
Click TOOLS > Remote MGMT > WWW to control HTTP access to your MAX-
207HW2R.
207HW2R.
Figure 57 TOOLS > Remote MGMT > WWW
The following table describes the labels in this screen.
Table 53 TOOLS > Remote MGMT > WWW
LABEL
DESCRIPTION
Server Port
Enter the port number this service can use to access the MAX-
207HW2R. The computer must use the same port number.
207HW2R. The computer must use the same port number.
Server Access
Select the interface(s) through which a computer may access the MAX-
207HW2R using this service.
207HW2R using this service.
Secured Client
IP Address
IP Address
Select All to allow any computer to access the MAX-207HW2R using
this service.
this service.
Select Selected to only allow the computer with the IP address that
you specify to access the MAX-207HW2R using this service.
you specify to access the MAX-207HW2R using this service.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.