ZyXEL Communications Corporation NBG4104 사용자 설명서
Chapter 7 Access Point Mode
NBG4104 User’s Guide
44
The table below describes the labels in the screen.
Table 13
Configuration > Networking > LAN > IP
LABEL
DESCRIPTION
IP Address
Type the IP address in dotted decimal notation. The default setting is 192.168.1.2. If
you change the IP address you will have to log in again with the new IP address.
you change the IP address you will have to log in again with the new IP address.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your NBG4104
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
NBG4104.
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
NBG4104.
Apply
Click Apply to save your changes to the NBG4104.
Reset
Click Reset to reload the previous configuration for this screen.