ZyXEL Communications Corporation PMG5318B20A 사용자 설명서

Chapter 4 WAN

PMG5318-B20A User’s Guide

Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 recipient) 
or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to a group of 
hosts on the network - not everybody and not just 1.

IGMP (Internet Group Management Protocol) is a network-layer protocol used to establish 
membership in a Multicast group - it is not used to carry user data. 

Use this screen to view your GPON Device’s WAN settings. Click Network > WAN. Your GPON 
Device’s number and names of default WAN interfaces may vary from this example.

Internet Access Setup Status  

The following table describes the labels in this screen.  

Use these screens to configure your GPON Device’s WAN interfaces. Click Modify or Add in the 
Network > WAN > Internet Access Setup status screen.

Internet Access Setup Status

Interface

This shows the name of the interface used by this connection.

Description

This is the service description for traffic using this connection.

Type

This shows the method of encapsulation used by this connection. 

Service Type

This is the service type for traffic using this connection.

Vlan ID

This shows the VLAN ID assigned to traffic for this connection. This is assigned by the OLT.

Vlan 802.1p

This displays the 802.1P priority level assigned to traffic sent through this connection.

ICMP

This shows whether the WAN interface will respond to ICMP packets.

NAT

This shows whether NAT is activated or not for this interface. NAT is not available when the 
connection uses the bridging service.

Modify

Click the Edit icon to configure the WAN connection.

Click the Remove icon to delete the WAN connection.

Add

Click this to create a new WAN connection.