ZyXEL Communications Corporation VMG1312B10A 사용자 설명서
Chapter 8 Home Networking
VMG1312-B10A User’s Guide
144
3
Click Apply to save your settings.
Figure 50
Network Setting > Home Networking > LAN Setup
The following table describes the fields in this screen.
Table 30
Network Setting > Home Networking > LAN Setup
LABEL
DESCRIPTION
Interface Group
Group Name
for how to create a new interface group.
LAN IP Setup
IP Address
Enter the LAN IP address you want to assign to your Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
example, 192.168.1.1 (factory default).
Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your Device automatically computes the subnet mask
based on the IP Address you enter, so do not change this field unless you are instructed to
do so.
255.255.255.0 (factory default). Your Device automatically computes the subnet mask
based on the IP Address you enter, so do not change this field unless you are instructed to
do so.
IGMP Snooping
Status
Select the Enable IGMP Snooping checkbox to allows the Device to passively learn
multicast group.
multicast group.
IGMP Mode
Select Standard Mode to have the Device forward multicast packets to a port that joins the
multicast group and broadcast unknown multicast packets from the WAN to all LAN ports.
multicast group and broadcast unknown multicast packets from the WAN to all LAN ports.
Select Blocking Mode to have the Device block all unknown multicast packets from the
WAN.
WAN.
DHCP Server State
DHCP
Select Enable to have the Device act as a DHCP server or DHCP relay agent.
Select Disable to stop the DHCP server on the Device.
Select DHCP Relay to have the Device forward DHCP request to the DHCP server.