ZyXEL Communications Corporation WAC6553D-E 사용자 설명서

 Chapter 3 Dashboard

NWA5000 / WAC6500 Series User’s Guide

SSID

This field displays the name of the wireless network to which the NWA/WAC is 
connected using WDS.

Security Mode

This field displays which secure encryption methods is being used by the NWA/WAC to 
connect to the root AP or repeater using WDS.

Link Status

This field displays the RSSI (Received Signal Strength Indicator) and transmission/
reception rate of the wireless connection in WDS.

System Status

System Uptime

This field displays how long the NWA/WAC has been running since it last restarted or 
was turned on.

Current Date/

Time

This field displays the current date and time in the NWA/WAC. The format is yyyy-mm-
dd hh:mm:ss.

Current Login 

User

This field displays the user name used to log in to the current session, the amount of 
reauthentication time remaining, and the amount of lease time remaining.

Boot Status

This field displays details about the NWA/WAC’s startup state.

OK - The NWA/WAC started up successfully.

Firmware update OK - A firmware update was successful.

Problematic configuration after firmware update - The application of the 
configuration failed after a firmware upgrade.

System default configuration - The NWA/WAC successfully applied the system 
default configuration. This occurs when the NWA/WAC starts for the first time or you 
intentionally reset the NWA/WAC to the system default settings.

Fallback to lastgood configuration - The NWA/WAC was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file.

Fallback to system default configuration - The NWA/WAC was unable to apply the 
lastgood.conf configuration file and fell back to the system default configuration file 
(system-default.conf).

Booting in progress - The NWA/WAC is still applying the system configuration.

Management 

Mode

This shows whether the NWA/WAC is set to work as a stand alone AP.

Interface Status 
Summary

If an Ethernet interface does not have any physical ports associated with it, its entry is 
displayed in light gray text. Click the Detail icon to go to a (more detailed) summary 
screen of interface statistics.

Name

This field displays the name of each interface. 

Status

This field displays the current status of each interface. The possible values depend on 
what type of interface it is.

Inactive - The Ethernet interface is disabled.

Down - The Ethernet interface is enabled but not connected.

Speed / Duplex - The Ethernet interface is enabled and connected. This field displays 
the port speed and duplex setting (Full or Half).

VID

This field displays the VLAN ID to which the interface belongs.

IP Addr/

Netmask

This field displays the current IP address and subnet mask assigned to the interface. If 
the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and 
subnet mask via DHCP.

If this interface is a member of an active virtual router, this field displays the IP address 
it is currently using. This is either the static IP address of the interface (if it is the 
master) or the management IP address (if it is a backup).

Dashboard (continued)