ZyXEL Communications Corporation WAP5805 사용자 설명서
Chapter 11 Troubleshooting
WAP5805 User’s Guide
76
1
Make sure the power LED is on.
2
Press the RESET button for longer than 1 second to restart/reboot the WAP5805.
3
Press the RESET button for longer than five seconds to set the WAP5805 back to its factory-default
configurations.
configurations.
If the WAP5805 restarts automatically, wait for the WAP5805 to finish restarting, and log in to the
Web Configurator. The password is “1234”.
Web Configurator. The password is “1234”.
If the WAP5805 does not restart automatically, disconnect and reconnect the WAP5805’s power.
Then, follow the directions above again.
Then, follow the directions above again.