ZyXEL Communications Corporation WAP7205 사용자 설명서
WAP7205 User’s Guide
12
C
HAPTER
2
Introducing the Web
Configurator
2.1 Overview
This chapter describes how to access the WAP7205 Web Configurator and provides an overview of its
screens.
screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the WAP7205 via Internet browser. Use Internet Explorer 8.0 and later or Safari 2.0 or
later versions. The recommended screen resolution is 1024 by 768 pixels.
management of the WAP7205 via Internet browser. Use Internet Explorer 8.0 and later or Safari 2.0 or
later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
• Java permissions (enabled by default).
2.2 Accessing the Web Configurator
1
Make sure your WAP7205 hardware is properly connected. See the Quick Start Guide.
2
Open a web browser such as Internet Explorer.
3
Type “http://zyxelsetup” (for Windows) or “http:// zyxelsetup.local” (for Mac) as the web address in your
web browser.
web browser.
The WAP7205 is a DHCP client by default. Alternatively, check the connected gateway for the
WAP7205's current IP address. Make sure your computer’s IP address is in the same subnet as the
WAP7205’s IP address. Type “http://(DHCP-assigned IP)” as the web address in your web browser.
WAP7205's current IP address. Make sure your computer’s IP address is in the same subnet as the
WAP7205’s IP address. Type “http://(DHCP-assigned IP)” as the web address in your web browser.
2.2.1 Login Screen
The Web Configurator initially displays the following login screen.