COOPER INDUSTRIES INC FH1847N 사용자 설명서

T245 Control System Manual

1

The T45 Control System consists of a custom Receiver/Controller (grey

box), an optional T245 Radio Transmitter and/or an optional T247 Cable Remote.  An
interface is also provided for an optional user-supplied Emergency Override Panel.  The
main components of the Receiver/Controller are an R1300+ (TPCB-1225-10) circuit
board, an S20 (TPCB-1458-03) board, and a DEX-900 radio receiver.

The Receiver/Controller’s software is custom-designed for many applications.

Various sensors mounted on the machine chassis send feedback information to the
Receiver/Controller.  This feedback information together with the operator commands
determine the drive outputs to the Apitech™ electric-over-hydraulic valves.  A
sophisticated computer program, permanently encoded into the firmware chips of the
Receiver/Controller, governs the mapping of inputs to outputs.

Features of the computer program include safety interlocks to prevent injury to

personnel as well as damage to the machine.  The program incorporates a “restart” check
which ensures that functions do not actuate unexpectedly due to operator panel switches
being left “on” by accident.

All wiring to the Receiver/Controller is through waterproof circular M.S.

connectors on the outside of the fibreglass enclosure, to ensure that the NEMA 4X rating
of the enclosure is preserved.  This manual describes considerations which should be
taken during installation and operation, and gives procedures for “tuning” the system to
match the exact characteristics of your hydraulic valves. CAUTION: Changes or modifications
 not expressly approved by the party responsible for compliance could void the user's authority 
to operate the equipment.

The list below gives the part numbers of the major components of the T245

Control System.  You will need these numbers for reference and ordering spare parts.

Component

OMNEX Part
Number

Versalift Part
Number