Applied Concepts Inc ACMI007 사용자 설명서
Applied Concepts 011-0131-00 rev 2
Page 8
3. Connect to the PC using the provided serial cable. This is a “straight-through”
serial cable. (Do not replace it with a “null modem” cable which will swap the
transmit and receive wires.
transmit and receive wires.
4. Connect to power by plugging the power adapter into the AC line and then plug
the power connector into the Power/Data cable. If using the DC power cable,
then plug the cigarette plug into a 12VDC (nominal) power supply.
then plug the cigarette plug into a 12VDC (nominal) power supply.
5. Load the Developer’s Kit CD on your PC. Insert the disc and allow the
automatic installer to run to completion. You will now have a new icon on your
desktop – a large red S.
desktop – a large red S.
6. Open the demo application called Stalker Dashboard to show the main screen
below. The text in the blue title bar at the top of the screen will depend on the
last used configuration file.
last used configuration file.
7. Make sure the Transmit status shows that the unit is transmitting (Transmit or
Xmit). If it shows as Hold, click on the Transmit/Hold softkey to turn the radar
transmitter on. Using the Mode and Zone softkeys set the Mode to Stationary
and the Zone to Both to see the most targets. The Speedometer Speed Sensor
does not have a stationary mode, so leave it set for Moving mode.
transmitter on. Using the Mode and Zone softkeys set the Mode to Stationary
and the Zone to Both to see the most targets. The Speedometer Speed Sensor
does not have a stationary mode, so leave it set for Moving mode.
8. Depending on the low speed cutoff selected, you can either move your hand
back and forth in front of the radar lens or point the Speed Sensor toward a
moving object to see speeds displayed in the windows. Targets moving directly
toward or away from the radar are measured with the most accuracy. The radar
can not measure the speed of objects moving across its beam at all. The Speed
Sensor can pick up large and small moving objects as well as unsuspected
targets such as PC fans and leaves blowing in the wind.
moving object to see speeds displayed in the windows. Targets moving directly
toward or away from the radar are measured with the most accuracy. The radar
can not measure the speed of objects moving across its beam at all. The Speed
Sensor can pick up large and small moving objects as well as unsuspected
targets such as PC fans and leaves blowing in the wind.