Proxim AP5C 사용자 설명서
Installation
17
Mounting Instructions
The Harmony 802.11a Access Point ships with a wall mounting kit so that the unit can
be mounted to a wall or ceiling.
be mounted to a wall or ceiling.
The wall mounting kit contains the following parts:
•
One AP Mounting Disk
•
Two Plastic Wall Mount Anchors
•
Two #6x0.75" Wood Screws
In addition, you will also need the following tools to wall mount the Access Point:
•
3/16" Drill (for installations using wall mount anchors)
•
Marking Pen
•
Phillips Screwdriver
Ceiling Mount
Follow these steps to mount the Harmony 802.11a Access Point on the T-bar that
separates office ceiling tiles:
separates office ceiling tiles:
1.
Slide the AP Mounting Disk over a ceiling tile’s T-bar so the bar rests between the
two clips on the mounting disk, as shown in the illustrations below.
two clips on the mounting disk, as shown in the illustrations below.
Figure 3: Attaching the AP Mounting Disk to a Ceiling T-Bar
Figure 4: AP Mounting Disk Secured to Ceiling T-Bar
Ceiling T-Bar
Mounting clips