National Datacomm Corporation 1022S01 사용자 설명서

 

 16 

 

 

Note the default setting shown in the 

 box. If the adapter had been within 

range of an access point (AP) that used the same SSID and did not require encryption, a 
connection would have been automatically established. This panel then would have shown the 
AP’s SSID and BSSID, as well as the current channel, transmission rate, link quality, and signal 
strength. 

(The terms SSID, BSSID, and infrastructure are explained in 

chapter 2, “Terminology Used in 

this Guide,”

 and in 

section 7.1.1, “Site Survey Section.”

 Channels and transmission rates are also 

explained in section 7.1.1. Mbps stands for megabits per second.) 

Choosing the 

 tab displays the 

 panel. This panel has a 

 section and 

a 

 section.