Charles Machine Works Inc The 8500TKR 사용자 설명서
8500 Tracking System Operator’s Manual
System Operation - 45
Drill-Thru Mode
CMW
Procedure
1.
Place tracker on the ground along intended bore path with left pod closest to drilling unit.
2.
Drill as usual.
•
While beacon is on the drilling unit side of tracker, a left/right steering correction arrow, current
depth, horizontal distance and projected depth are provided.
depth, horizontal distance and projected depth are provided.
•
After beacon passes under tracker, current depth and horizontal distance are provided. Projected
depth and the left/right steering arrow are no longer provided.
depth and the left/right steering arrow are no longer provided.
Sample Screens
7.
Locate mode button
Press to return to locate
mode.
mode.
8.
Current depth indicator
Indicates current position
relative to tracker.
relative to tracker.
9.
View button
Press to switch between drill-
thru and beacon view.
thru and beacon view.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
NOTICE: If location and depth are critical, confirm by hand-digging.
Beacon is approaching tracker pitched down 38%. Beacon is 30” (2’ 6”) deep and the projected depth
at tracker is 57” (4’ 9”). The horizontal distance to the tracker is 42” (3’ 6”). The beacon is on the
projected path as indicated by the diamond in the center of the Beacon View.
at tracker is 57” (4’ 9”). The horizontal distance to the tracker is 42” (3’ 6”). The beacon is on the
projected path as indicated by the diamond in the center of the Beacon View.
Drill-Thru View
Beacon View