Charles Machine Works Inc The CMW-300ST 사용자 설명서
34
300SR/ST - OPERATION
LOCATE LINE: ACTIVE LOCATION
34
300SR/ST - OPERATION
LOCATE LINE: ACTIVE LOCATION
Technique
IMPORTANT: Follow steps 1-3 for all types of active location. For
reference, the illustration below shows direct connection method.
If using broadcast induction, ensure that transmitter is in line with
and above suspected line, as shown on previous page.
reference, the illustration below shows direct connection method.
If using broadcast induction, ensure that transmitter is in line with
and above suspected line, as shown on previous page.
1.
Walk in an arc approximately 25 ft (7.5 m) around transmitter.
2.
Hold the receiver as shown.
3.
Identify location of line by finding the spot with the strongest
signal response.
signal response.
ss1131h.eps
7.5
m
25
ft
Technique
IMPORTANT: Follow steps 1-3 for all types of active location. For
reference, the illustration below shows direct connection method.
If using broadcast induction, ensure that transmitter is in line with
and above suspected line, as shown on previous page.
reference, the illustration below shows direct connection method.
If using broadcast induction, ensure that transmitter is in line with
and above suspected line, as shown on previous page.
1.
Walk in an arc approximately 25 ft (7.5 m) around transmitter.
2.
Hold the receiver as shown.
3.
Identify location of line by finding the spot with the strongest
signal response.
signal response.
ss1131h.eps
7.5
m
25
ft