Fujifilm Pro 160NS 16016221 사용자 설명서
제품 코드
16016221
- 1 -
AF3-0232E
COLOR NEGATIVE FILMS
1.
FEATURES AND USES
FUJICOLOR PRO 160 NS PROFESSIONAL is an ISO
films peed 160 daylight-type color negative film designed
for professional use, featuring more highly optimized skin
tone reproduction and neutral gray balance, especially
important for portrait photography. Through its use of
Fourth Color Layer technology, the newest emulsion
technologies and new coupler technology, this film is
able to deliver better grain quality and smoother skin
tone reproduction than current films. Moreover, thanks
to its well-controlled gray balance, it provides a wider
exposure latitude that makes it more suitable for digital
scanners. The further addition of single-channel printing
results in uniform printing efficiency with other films in
the FUJICOLOR PRO series.
Features
films peed 160 daylight-type color negative film designed
for professional use, featuring more highly optimized skin
tone reproduction and neutral gray balance, especially
important for portrait photography. Through its use of
Fourth Color Layer technology, the newest emulsion
technologies and new coupler technology, this film is
able to deliver better grain quality and smoother skin
tone reproduction than current films. Moreover, thanks
to its well-controlled gray balance, it provides a wider
exposure latitude that makes it more suitable for digital
scanners. The further addition of single-channel printing
results in uniform printing efficiency with other films in
the FUJICOLOR PRO series.
Features
Superb skin tone
•
·······
rendition
Smooth, extremely fine skin
tone rendition optimized for
portraiture.
tone rendition optimized for
portraiture.
Wide exposure
•
···········
stability
Wide exposure latitude
producing less variation
in over- or under-exposed
frames.
producing less variation
in over- or under-exposed
frames.
Neutral gray balance
•
· Rich gradations from the
highlights to the shadows and
depiction of natural-looking
grays. Optimized digital
scanner suitability.
depiction of natural-looking
grays. Optimized digital
scanner suitability.
Fine grain quality
•
······· Grain quality raised to a
superior level. Higher grain
density in images for enhanced
skin texture depiction.
density in images for enhanced
skin texture depiction.
Addition of single-
•
·····
channel suitability
Negative density level unified
with other PRO series films for
maximum printing uniformity
and efficiency.
with other PRO series films for
maximum printing uniformity
and efficiency.
2.
ISO FILM SPEED
Light Source
ISO Film Speed Color Balancing Filter
Daylight &
Electronic Flash 160/23°
None
Tungsten Light
(3200K)
50/18°
equivalent
Wratten No. 80A
(or LBB-12**)
* Indicates the effective speed resulting from designated filter
use.
**Fuji Light Balancing filter
3.
FILM SIZES, EMULSION NUMBER, BASE
MATERIAL AND THICKNESS
Size and Package Configuration
Emulsion
Number
Roll
120 ... 12-exp. [6x6] (5-roll pack)
4XX–
Sheet 4 x 5 in. (10.2 x12.7 cm)...20 sheets
8 x10 in. (20.3 x 25.4 cm)...20 sheets
Base Material
Thickness
Roll
Cellulose Triacetate
98μm (120)
Sheet
Polyester
175μm
4.
EXPOSURE GUIDE
Use a meter to determine the exposure setting. If a
meter is not available, refer to the following table.
Daytime/Outdoors
meter is not available, refer to the following table.
Daytime/Outdoors
Seashore
or Snow
Scenes
under
Bright Sun
Bright
Sunlight
Hazy
Sunlight
Cloudy
Bright
Cloudy
Day or
Open
Shade
Lens
Opening
f/22
2/3
f/16
2/3
f/11
2/3
f/8
2/3
f/5.6
2/3
Shutter
Speed
(sec)
1/125
Notes
The settings in the table above are for 2 hours after sunrise and
•
2 hours before sunset.
Since light conditions vary greatly for cloudy/bright and open
Since light conditions vary greatly for cloudy/bright and open
•
shade, use of an exposure meter is recommended.
Close-up shots with backlighting may require a lens opening
Close-up shots with backlighting may require a lens opening
•
adjustment of f1 to f2 stops.
FUJICOLOR PRO 160 NS PROFESSIONAL