GIGA-BYTE TECHNOLOGY CO. LTD. GN-BR02G 사용자 설명서
GN-BR02G 2.4GHz Wireless Broadband Router
8
side panel of the GN-BR02G and the other end to the 10/100
Ethernet port of your computer.
Ethernet port of your computer.
(It does not matter which LAN port you
select).
Step 4
Plug the power adapter cord into the router’s power jack and then
plug the power adapter into a power outlet.
plug the power adapter into a power outlet.
Step 5
Turn on your ADSL/Cable modem. After verifying all the connections,
proceed to Chapter 5 Connecting the Router to the Internet.
proceed to Chapter 5 Connecting the Router to the Internet.
Using a Wireless Connection
Step 1
Turn off all the hardware devices in your network, including the
ADSL/Cable modem by unplugging their power supply.
ADSL/Cable modem by unplugging their power supply.
Step 2
Connect the Ethernet cable of your ADSL/Cable modem to the WAN
port of the GN-BR02G.
port of the GN-BR02G.
Step 3
Plug the power adapter cord into the router’s power jack and then
plug the power adapter into a power outlet.
plug the power adapter into a power outlet.
Step 4
Turn on your ADSL/Cable modem.
Step 5
Insert you PCMCIA notebook card, or wireless USB adapter into
your notebook PC.
your notebook PC.
Step 6
If using a GIGABYTE PCMCIA notebook card, SmartSetup 3 will
automatically detect your BR02G and walk you through the setup
procedure (for more details refer to your SmartSetup 3 Guide).
Please refer to your vendor’s users manual for connecting to the
wireless network.
automatically detect your BR02G and walk you through the setup
procedure (for more details refer to your SmartSetup 3 Guide).
Please refer to your vendor’s users manual for connecting to the
wireless network.
Step 7
When scanning for available wireless networks, your BR02G’s
factory default SSID name is GIGABYTE. Select it using the
procedures described in your particular vendor’s notebook adapter
users manual.
factory default SSID name is GIGABYTE. Select it using the
procedures described in your particular vendor’s notebook adapter
users manual.
Step 8
After verifying all the connections, proceed to Chapter 5
Connecting the Router to the Internet.
Connecting the Router to the Internet.