GIGA-BYTE TECHNOLOGY CO. LTD. GN-BR02G 사용자 설명서

GN-BR02G 2.4GHz Wireless Broadband Router 

59 

 
Computers access the Internet using a protocol called TCP/IP (Transmission 
Control Protocol/ Internet Protocol). Each computer on your network must have 
TCP/IP installed and selected as its networking protocol. If a Network Interface 
Card (NIC) is already installed in your PC, then TCP/ IP is probably already 
installed as well.    Please follow the steps in this chapter to assure the correct 
TCP/IP settings.    For advanced users who know the TCP/IP settings are 
already correct, you may skip this section and proceed directly to Chapter 6 
Advanced Setup.  
 
 
Enabling DHCP to Automatically Configure TCP/IP Settings 
 
Each PC using accessing the wireless router must be assigned specific 
information about itself and resources that are available on its network. The 
simplest way to configure this is to allow the PC to automatically assign the IP 
by using a DHCP server.    Follow the steps below to allow windows to 
automatically assign IP numbers for you. 
 
Step 1 

Click the Start button. Select Settings and then click the Control 
Panel icon. 

 

 

 
Step 2 

Double-click the Network and Dial-up Connection icon.