GIGA-BYTE TECHNOLOGY CO. LTD. GN-BR32V-RH 사용자 설명서
GN-BR32V-RH 2.4GHz AirCruiser Ultra N Wireless Router
27
The SSID (Service Set Identifier) is the name of your wireless network. The
SSID is up to 32 ASCII characters in length and case sensitive (i.e. Letters in
upper case “A~Z” and lower case “a~z” are unique). The default SSID is
“GIGABYTE”. To change the SSID, type in the SSID you want to use in the
SSID field and click Submit. If you make a change to the SSID, any wireless
devices on your network must also be reconfigured to connect to the new
network name.
SSID is up to 32 ASCII characters in length and case sensitive (i.e. Letters in
upper case “A~Z” and lower case “a~z” are unique). The default SSID is
“GIGABYTE”. To change the SSID, type in the SSID you want to use in the
SSID field and click Submit. If you make a change to the SSID, any wireless
devices on your network must also be reconfigured to connect to the new
network name.
Hidden SSID
For security purposes, you may choose to hide your network’s SSID by
selecting enable from the drop-down list. This will prevent computers scanning
for the presence of wireless networks to detect your network name. The default
setting is disable.
Authentication Type
Select an authentication type from the drop-down list. The default setting is
Open System.
Open System: The sender and the receiver do NOT share a secret key. Each
party generates its own key-pair and asks the receiver to accept a randomly
generated key. Once accepted, this key will only be used for a short period of
time. Afterwards, a new key will be generated and agreed upon.
Shared Key: Authentication is based upon a secret key shared by both the
sender and the receiver. If Shared Key is selected, you cannot choose the
WEP disable option.
WPA Pre-shared key: The WPA Pre-shared Key authentication standard uses
a password or “key” between 8 and 32 characters. This encryption key is
changed after every dialog box using the Temporary Key Integrity Protocol
(TKIP), which allows users to change keys based on dialog box and
automatically synchronize keys between devices on the network. The TKIP
encryption algorithm is stricter than the one used by WEP but is based on the
same standard.
WPA: The 802.1x authentication protocol, allows users to authenticate wireless
network access through a RADIUS Server and is a required by WPA standard.
If no RADIUS Server exists in your network environment, you still can use WPA
through the use of WPA Pre-shared Key.
WEP Key
The GN-BR32V-RH supports two WEP standards: 64-bit,128-bit. Select either
64-bits or 128-bits from the drop-down list activate WEP encryption. The 64-bits
encryption uses 40 bits as a secret key, (user-defined) and the remaining 24
bits are reserved. The 128-bits encryption uses 104 bits as a secret key,
(user-defined) and the remaining 24 bits are reserved.
WPA Re-key
Enabling the requirement for WPA rekeying of a Passphrase for increased
For security purposes, you may choose to hide your network’s SSID by
selecting enable from the drop-down list. This will prevent computers scanning
for the presence of wireless networks to detect your network name. The default
setting is disable.
Authentication Type
Select an authentication type from the drop-down list. The default setting is
Open System.
Open System: The sender and the receiver do NOT share a secret key. Each
party generates its own key-pair and asks the receiver to accept a randomly
generated key. Once accepted, this key will only be used for a short period of
time. Afterwards, a new key will be generated and agreed upon.
Shared Key: Authentication is based upon a secret key shared by both the
sender and the receiver. If Shared Key is selected, you cannot choose the
WEP disable option.
WPA Pre-shared key: The WPA Pre-shared Key authentication standard uses
a password or “key” between 8 and 32 characters. This encryption key is
changed after every dialog box using the Temporary Key Integrity Protocol
(TKIP), which allows users to change keys based on dialog box and
automatically synchronize keys between devices on the network. The TKIP
encryption algorithm is stricter than the one used by WEP but is based on the
same standard.
WPA: The 802.1x authentication protocol, allows users to authenticate wireless
network access through a RADIUS Server and is a required by WPA standard.
If no RADIUS Server exists in your network environment, you still can use WPA
through the use of WPA Pre-shared Key.
WEP Key
The GN-BR32V-RH supports two WEP standards: 64-bit,128-bit. Select either
64-bits or 128-bits from the drop-down list activate WEP encryption. The 64-bits
encryption uses 40 bits as a secret key, (user-defined) and the remaining 24
bits are reserved. The 128-bits encryption uses 104 bits as a secret key,
(user-defined) and the remaining 24 bits are reserved.
WPA Re-key
Enabling the requirement for WPA rekeying of a Passphrase for increased