GIGA-BYTE TECHNOLOGY CO. LTD. GN-BR402W 사용자 설명서

 

34 

Step 15.   If you select “Static IP Address” in the WAN TYPE SELECT, please key in the data 

provided by the wideband company in the following fields as shown below:   

Note:   a. If your wideband company gives you more than one IP address, then select one of them to 

fill in the column in the above figure, and refer to Appendix A for the use of other IP 

addresses. 

       b. Static IP Setup 

         Normal Users please use "NAT enable" then connect to Internet in general. 

 

 

 

Step 15.    After “Reboot” is pressed, it proceeds with the next step.