GIGA-BYTE TECHNOLOGY CO. LTD. GN-WP01GT 사용자 설명서

25 

 

Configure WEP Key 

 

 
To configure your encryption key, please follow these steps: 
1. Select a Key Entry Method (Hex or ASCII). 
2. Enter one unique encryption key and its key length. 
3.  Enter one to four different shared keys and their individual key length.   
„  For 64-bit encryption, enter 10 digitals by Hex or 5 characters by ASCII. 
„  For 128-bit encryption, enter 26 digitals by Hex or 13 characters by ASCII. 
„  For 152-bit encryption, enter 32 digitals by Hex or 16 characters by ASCII. 
4.  Select only a key to encrypt your transmission data. 
5. Click “OK” to save these settings. 
 
3-3-3-3. Use WPA-PSK Security (WPA Pre-Shared Keys): 
 
When you select this item, the target 802.11 device must has the same encryption keys 
and be configured to use encryption in order to communicate with each other. To configure 
your WPA-PSK encryption, please click “WPA-PSK “then the following window will pop up 
(see Figure 3-13). 
 

Configure WPA-PSK Key 

           

 

 
3-3-3-4. Use Dynamic Security (WPA, 802.1X etc.): 
 
WPA & 802.1X is an IEEE security standard for network security access control. It is