GIGA-BYTE TECHNOLOGY CO. LTD. T1000 사용자 설명서

10

The battery will gradually weaken over time. We recommend that 

you replace your battery when you notice a significant decrease of 

battery capacity.

To change the battery pack, follow the steps below:
1.  Turn off the computer.
2.  Close the lid and flip the computer over.
3.  Slide the battery latch. Continue to hold it until the battery is 

removed.

4.  Make sure the replacement battery is properly oriented before 

inserting it into the battery compartment.

 

„

Do not connect the adapter to any other device.

 

„

Do not step on the power cord or place heavy objects on top of it. 

Carefully route the power cord and keep cables away from all traffic.

 

„

When unplugging the power cord, do not pull on the cord itself but on 

the plug instead.

 

„

If you are using an extension cord, make sure that the devices 

plugged onto the cord do not exceed its total capacity. Furthermore, 

the devices plugged into the electrical outlet shall not exceed the fuse’

s total ampere rating.

 

„

Please verify power voltage before connecting the electrical cord to 

the power outlet. If you are uncertain of its power specification, please 

consult with your local vendors or power company for more details.

The AC adapter converts AC power to DC power and reduces the 

voltage supplied to the computer. It can automatically adjust to 

any voltage from 100 to 240 volts and outputs power at 12V/19V,  

allowing you to use your T1000 TouchNote computer in almost any 

region.

CAUTION:  Use  only  the AC  adapter  and  the  power  cord  we 

recommend. Using the wrong adapter may damage your computer. 

We assume no responsibilities for damages arising from misuse of 

AC adapters.

1

3

2

To properly connect the adapter, follow the steps as below:
1.  Connect the power cord to the AC adapter.
2.  Connect the AC adapter to the DC power port of your computer.
3.  Connect the AC adapter power cord to an AC outlet.