GIGA-BYTE TECHNOLOGY CO. LTD. 28713ECO600 사용자 설명서

◎ 

1. Remove worn-out batteries from equipment immediately and dispose of promptly.

2. Keep all batteries (used or new) out of the reach of children.

3. To have the batteries with a regular check and replace new batteries if not used for a long time.

4. Never dispose of batteries in fire, as they could explode.

5. Always replace all the batteries at the same time.  Mixing old and new batteries or mining types (such 

    as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture.

6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.

7. Remove batteries from the electrical device if the device is not going to be used for a long time.

8. If the performance of the batteries decreases substantially, it is time to replace the batteries.

◎ 

a. Make sure you have connected the receiver correctly to the computer's USB port.

b. For the best performance, we suggest you to locate the receiver with a distance from other electrical 

    devices, such as the computer, the computer monitor or external storage drives.

c. Make sure you have set the communication between the receiver and the mouse. Refer to the 

    Communication :The mouse and the receiver

d. If you find the communication channel does not connect well.  You can use the software connection 

    tool to re-connect the mouse & receiver 

to reset a new channel ID.  You are able to get the software 

    from the included diskette of the package or download from your local brand vendor's website. 

e. Some system devices might conflict with the mouse.  Confirm the IRQ/address settings of these 

    devices for conflicts, and change the settings as required.

f.  Make sure that you are not working the mouse on glossy or reflective surfaces.

Press ID reset button

Execute ID connection software

Please replace a pair of new batteries and follow the previous instructions. (2, 3)

The red LED on the scroll wheel is the low batteries power indicator.  It indicates that 

batteries inside the mouse are needed to be replaced.

While the mouse is working, if encountering any interference, the mouse and the receiver will 

automatically  source  out  and  transfer  to  another  free  channel.    During  the  transferring,  the 

cursor movement may have a second delay.

The 2.4Ghz RF mouse features a dual-way transmission technology which enables the 

mouse and the receiver auto-communication.

1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.

2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the 

    mouse and the receiver is auto-linked successfully.

If you find the communication channel does not connect well, you can use the software 

connection tool to re-connect the mouse & receiver 

to reset a new channel ID.   You are 

able to get the software from the included diskette of the package or download from your 

local brand vendor's website. 

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there 

is no guarantee that interference will not occur in a particular installation if this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one of the following measures:

● 

Reorient or relocate the receiving antenna.

● 

Increase the separation between the equipment and receiver.

● 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

To assure continued compliance, any changes or modifications not expressly approved by the party 

responsible for compliance could void the user's authority to operate this equipment. (Example-use only 

shielded interface cables when connecting to computer or peripheral devices).

a. Turn on your PC.

b. Connect the receivere to USB port on PC.

PC

USB port

Pull out 

the receiver