GIGA-BYTE TECHNOLOGY CO. LTD. GMFPB-01 사용자 설명서

 

＊ 

A device that features USB port 

＊ 

Windows 98Se, Me, 2000, XP   

＊     Mac OS 9.1 or its newer version, Mac OS X (10.1) or its newer version

 

 

1. Insert battery into the RF Remote. 
2. Connect the RF Receiver to an USB port. 
  Windows: Windows will detect the new hardware and install appropriate software via 

the New Hardware Wizard.  Please have your Windows System 
CD-ROM ready in case the Wizard asks for it. 

 

3. See below for details on how to use the RF Remote Control. 
 

The remote features two modes that are controlled via the Mode Button.  Hold down 
the Mode Button for 2 sec to switch one mode to another.    When the Mode Button is 
not lit in green, the remote is in Standard Mode.  When the Mode Button is lit in green, 
the remote is in Media Mode.   
 

When you turn on the Power Switch Button the Laser Pointer will be activated 
automatically.

   

The Mode Button will be lit in red when the Laser Pointer Button is 

pressed.  To deactivate the Laser Pointer, simply turn off the Power Switch Button. 

 

 

The RF receiver is not just a device that connects to the remote control.  It also features 
the functionality of data storage.  When you plug in the RF receiver into an USB port, your 

computer will recognize the device automatically by showing “Found New Hardware” at the 
lower right on your windows task bar.  You can use it as a flash disk that you can carry 
around.  Please click on the windows task bar to safely remove the device, the window 

should appear as the picture below. 

 

 

Laser Lens 

Laser on/off 

------ 

 

Power Switch 

Power Switch 

Power Switch  Remote Power on/off 

Mouse Control 

Mouse X-Y 

Mouse X-Y 

Mouse curse control 

Right Mouse   

Right Mouse 

      

Stop 

Left Mouse 

Left Mouse 

 

Play/Pause 

Mode Button 

Mode 

Mode Switch 

Hold down Mode Button for 2 
sec to switch to the Media 
Mode.  (see Remark 1) 

Composite Switch 

Up: Line Up 

 

Up: Volume up   

 

Down: Line Down 

 

Down: Volume down   

 

Push: Drag 

 

Push: Mute 

Button A 

Full Screen/ESC 
(see Remark 2) 

   

Call Windows Media Player   

Button B 

Black/ESC

 

 

Next track   

1. You can have several remotes working simultaneously.   

To do this, each Remote must have a unique ID to avoid interference with each other.   

 

1-1.  Press the Mode Button and Button A together for at least 2 seconds to 

activate the green LED.   

 

1-2.  Then press Receiver Button on the receiver, the receiver will be in standby 

mode. Then press mouse control button, a new ID will be enabled.   .   

 

1-3.  Once the battery is removed, the ID will go back to the initial setting.  To have 

a specific ID you will have to repeat the steps 1-1 to 1-2.   

 

1-4.  If the receiver button is pressed for over 40 seconds, the receiver will go back 

to the initial setting.  To retrieve the ID you will have to repeat steps 1-1 to 1-2. 

 

2.  While the same button is pressed for over 40 seconds, it will stop working 

automatically to avoid careless touch.   

 

 

 

 
 
 
 
 

Pointer Button 

Mouse Control 

Standard Mode: Left Mouse Button 
Media Mode: Play/Pause 

 
Composite Switch 
 

Button A 

Power Switch 

Mode Button 

Button B 

Standard Mode: Right Mouse Button 
Media Mode: Stop 

Receiver Button