HID Global Corporation 5553 사용자 설명서

 

HF Multi ISO RFID Reader User Manual, Firmware V1.4 

 

1508-USM-00-0-04 

 

The MIFARE transponder family consists of various 13.56 MHz transponder ICs, all compliant to 
the ISO 14443.  Infineon My-D tags that support the MIFARE command set are also included here. 

The MIFARE Standard card consists of 16 sectors. A sector includes four blocks of 16 bytes each. 

MIFARE Standard 

 

Sector 2 

Sector 0 (Block: 0...3) 

 

Block 8:  

Data or value (16 bytes) 

Sector 1 (Block: 4...7) 

 

Block 9:  

Data or value (16 bytes) 

Sector 2 (Block 8...11) 

 

Block 10:  

Data or value (16 bytes) 

... 

 

Block 11:  

Access Conditions (4 bytes), 

 

Key A, Key B (16 bytes) 

Sector 15 (Block 60...63) 

 

Block 0 is read only. 

Serial Number (4 bytes) 

Check byte (1 byte) 

Manufacturer data (11 bytes) 

Transport keys are set on delivery: 

Key A (6 bytes) 

Access Conditions (4 bytes) 

Key B (6 bytes) 

A0 A1 A2 A3 A4 A5 (Infineon) or FF FF FF FF FF FF (new NXP cards) 

B0 B1 B2 B3 B4 B5 (Infineon) or FF FF FF FF FF FF (new NXP cards) 

FF 07 80 xx (key A is used to read or write; key A itself is not readable; key B is data only). For 
further information refer to the MIFARE card manual. 

Enabled keys are always read as 00 00 00 00 00 00 

Using key B as a data area will cause a security gap, due to the fact that it is necessary to rewrite 
key A and the access conditions at each write process. It is not recommended to use key B as a 
data storage area. 

August 2010 

 

Page 109 of 144 

© 2005-2010 HID Global Corporation.  All rights reserved.