HID Global Corporation 5553 사용자 설명서
1508-USM-00-0-04
HF Multi ISO RFID Reader User Manual, Firmware V1.4
2.3.8 ‘e’ command block
Examples – Version 1 & 2
Command
Description
e:00 01 10 11 (Version 1)
Start communication
Answer:
ATR
e:00 81 00 10 11 00 (Version 2)
Start communication (T=0)
e:00 91 00 10 11 00 (Version 2)
Start communication (T=1)
Answer: 00 len-ATR ATR
e:04 00 10 11 FF 11 86 68 (V1)
PPS
Answer: FF 11 86 68 (if tag agrees with proposal)
e:04 A0 00 00 11 04 FF 11 86 68 (V2)
PPS
Answer: 00 00 04 FF 11 86 68 (if tag agrees with proposal)
e:00 20 10 11 (V1)
Warm reset
Answer:
ATR
e: 00 83 00 10 11 00 (V2)
Warm reset (T=0)
e: 00 93 00 10 11 00
Warm reset (T=1)
Answer: 00 len-ATR ATR
e:00 02 00 00 (V1)
End communication
Answer:
P
e:00 82 00 10 00 00 (V2)
End communication (T=0)
e:00 92 00 10 00 00
End communication (T=1)
Answer: 00h
The following commands are taken from the NXP DESFire8 SAM-X specification document
e:05 00 00 10 11 00 00 84 00 00 08
GetChallenge for T=0
e:09 00 00 10 11 00 00 00 05 80 84 00 00 08 09
GetChallenge for T=1. This now includes the T=1 frame
Answer: 00 len-reply reply (varies)
e:08 00 10 11 00 5A 00 00 03 (3 bytes DF-AID)
SelectApplication for T=0
e:0C 00 10 11 00 00 08 80 5A 00 00 03
SelectApplication for T=1 This now includes the T=1 frame
(3 bytes DF-AID) EDC
Answer: (2 bytes) – see DESFire SAM spec
e:08 80 00 10 11 00 00 5A 00 00 03 (3 bytes DF-AID)
SelectApplication for T=0
e:0C 90 00 10 11 00 00 00 08 80 5A 00 00 03
SelectApplication for T=1 This now includes the T=1 frame
(3 bytes DF-AID) EDC
Answer: 00 02 reply – see DESFire SAM spec
e:08 9F 00 10 11 00 80 5A 00 00 03 (3 bytes DF_AID) DESFire SAM_SelectApplication using T=1 APDU. Notice
there is no block format or EDC, just the ‘INF’ APDU data
Answer: Data SW1 SW2 [ - 90 00 for ‘ack’]
Page 102 of 144
August 2010
© 2005-2010 HID Global Corporation. All rights reserved.