HID Global Corporation OK5127 사용자 설명서
Installation Guide
OMNIKEY
®
Smart Card Reader
© 2010 – 2011 HID Global Corporation - All rights reserved.
3
Specifications and Installation
For further information, contact HID support:
http://support.hidglobal.com/
.
For driver setup, consult the OMNIKEY Smart Card User Guide
(
(
http://www.hidglobal.com/documents/ok3121_userguide_ins_en.pdf
).
CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer.
USB Connected Reader Specifications
Operating Temperature
0°-55°C / 32°-131°F
PC Connector Cable
180 cm / 70.9 in
(150 cm / 59,1 in - Models 1021 & 3021)
(150 cm / 59,1 in - Models 1021 & 3021)
Meantime between Failure (MTBF)
500,000 Hours
Host Interface
USB 2.0 CCID (USB 1.1 Compatible)
Host Data Transmission Speed
12 Mbps (USB 2.0 Full Speed)
Power Supply
Bus Powered
USB Connected Reader Installation
1. Connect the reader with your computer; plug the USB connector into your
computers USB port.
2. When the reader is operational, the LED illuminates.
3. For contactless operation, hold the card next to the reader logo. For contact
smart cards, insert the card into the reader with contacts facing up.
4. When the reader is exchanging data with a card (reading/writing), the LED blinks.
PCMCIA and ExpressCard Reader Specifications
4321
4040
Operating Temperature
0°-55°C / 32°-131°F
Meantime between Failure (MTBF)
500,000 Hours
Host Interface
ExpressCard™ 54 mm
PCMCIA
Host Data Transmission Speed
12 Mbps
16 Mbps
Power Supply
Bus Powered
PCMCIA
PCMCIA and ExpressCard Reader Installation
1. Insert the reader into the compatible interface slot of your Notebook or PDA.
2. If the reader is operational, observe the reader in your operating system’s Device
Manager.
3. For contactless operation, hold the card next to the logo on the reader. For
contact smart cards, insert the card into the reader with contacts facing up.