Trimble Inc. 5580090 사용자 설명서
3 Batteries and Power
28 SPSx50 Modular GPS Receiver User Guide
Removing the rechargeable Lithium-ion battery
The internal Lithium-ion battery should be removed only at an authorized Trimble
Service Center. If the battery is removed at an unauthorized service center, the
remaining warranty on the product will be void.
Service Center. If the battery is removed at an unauthorized service center, the
remaining warranty on the product will be void.
Operating the receiver with a Trimble controller
You can operate an SPS GPS receiver with any Trimble controller, for example, a TSC2
or TCU controller, that is running the SCS900 software. Typically, the receiver and the
controller operate from their own individual power sources. The receiver and
controller can communicate through Bluetooth wireless technology and can be
connected without a cable. However, if a cable is required, the following information
indicates which cable to use with which controller:
or TCU controller, that is running the SCS900 software. Typically, the receiver and the
controller operate from their own individual power sources. The receiver and
controller can communicate through Bluetooth wireless technology and can be
connected without a cable. However, if a cable is required, the following information
indicates which cable to use with which controller:
Controller
Cable
Controller connector
Receiver connector
TSC2
P/N 18532
DSub9
DSub9
TCU
P/N 5302007
6H (Marked “Com” on the controller
GPS holder)
GPS holder)
DSub9
TCU
(alternative
connection)
(alternative
connection)
P/N 53004007 6H (Marked “Com” on the controller
GPS holder)
7OS