Trimble Inc. 5580090 사용자 설명서
7 Configuring the Receiver Settings
72 SPSx50 Modular GPS Receiver User Guide
8.
Enter the network settings in the Ethernet Configuration dialog. Click
OK
:
The Broadcast setting is the IP address that is used to broadcast to all devices on
the subnet. This is usually the highest address (usually 255) in the subnet.
the subnet. This is usually the highest address (usually 255) in the subnet.
Configuring the SPSx50 receiver using a web browser
The SPSx50 receiver can be configured using the keypad and display, Trimble SCS900
Site Controller software, or a web browser. This section describes how to set up the
receiver using a web browser.
Site Controller software, or a web browser. This section describes how to set up the
receiver using a web browser.
Supported browsers
•
Mozilla Firefox version 1.07 or later (version 1.50 is recommended for Windows,
Macintosh, and Linux operating systems)
Macintosh, and Linux operating systems)
•
Microsoft Internet Explorer version 6.00 or later for Windows operating systems