Trimble Inc. 614 사용자 설명서
5 Using the GPS receiver
76 GeoExplorer 2008 Series User Guide
Outputting GPS data to external equipment
The GPS Connector software is pre-installed on the
GeoExplorer 2008 series handheld. Use the software to
specify how the integrated GPS receiver communicates
with equipment that is connected to one of the
handheld’s external communications ports.
GeoExplorer 2008 series handheld. Use the software to
specify how the integrated GPS receiver communicates
with equipment that is connected to one of the
handheld’s external communications ports.
To open GPS Connector, tap
/ Settings / Connections / GPS Connector.
The GPS Connector software lets you connect the GPS
COM ports to COM1 or Bluetooth ports and configure
port settings such as the baud rate. GPS Connector
software has a graphical display that shows all active
connections, and a text display that shows connection
messages.
COM ports to COM1 or Bluetooth ports and configure
port settings such as the baud rate. GPS Connector
software has a graphical display that shows all active
connections, and a text display that shows connection
messages.
Use the GPS Connector software to output NMEA or TSIP messages from the
integrated GPS receiver to another device, such as an external data collector.
integrated GPS receiver to another device, such as an external data collector.
Note –
If you are using a Bluetooth port, ensure that the
Bluetooth radio is on and the handheld is visible to other
devices. Use the GPS Connector software to configure
NMEA or TSIP output to Bluetooth - COM9, which is the
pre-defined Bluetooth Host Serial Port. For more
information, see
devices. Use the GPS Connector software to configure
NMEA or TSIP output to Bluetooth - COM9, which is the
pre-defined Bluetooth Host Serial Port. For more
information, see
.
The connections that you create in the GPS Connector
software are active only while the software is running.
Connections created by the GPS Connector software are
labeled GPS Connector in the status screen and end when
you exit the software.
software are active only while the software is running.
Connections created by the GPS Connector software are
labeled GPS Connector in the status screen and end when
you exit the software.
For more information, refer to the GPS Connector Help.