Pantech P9020 사용자 설명서
SIM card and battery
About your SIM card
When you subscribe to your network operator, you receive a SIM
(Subscriber Identity Module) card containing your registration information,
PIN code, etc.
Like a credit card, it should be kept secure and handled carefully. Do not
bend, scratch or expose it to moisture. Avoid static electricity.
To avoid corrupting your SIM card‟s memory, always switch off your phone
before removing or inserting your SIM card.
About your battery
Your phone uses a Li-Ion battery. Make sure to use an authorized battery
and charger only. For more details, please inquire at your nearest dealer.
NOTE: Your phone is powered by a Lithium Ion (Li-Ion) battery. Unlike other
forms of battery technology, you can recharge your battery while some
charge remains without reducing your
phone‟s autonomy due to the “battery
memory effect” inherent in those technologies.
Installing/removing SIM card and battery
1. Remove the battery cover from the unit.
2. To fit the battery cover, put it on the
guide rail and push up.
3. Insert the SIM card into the slot. The gold contacts of
the SIM card should go against the metal contacts of
the phone. Put the contacts of the battery into the hole
located at the bottom of the unit insert and Tap the
upper side of the battery until you hear the “click”.
4. To remove the battery push the bottom of the battery
to upwards (1) and remove (2) the battery. Push the
SIM card in the direction of the arrow as shown.
To charge your battery
1. To charge, open the protective cover on the top
right side and connect the charger adapter.
Make sure you align the connector as the image.
If not, it will damage the charging connector on
the phone and will not charge.
2. To remove the adapter connection Tap the
adapter‟s side buttons(1) and pull the adapter
away(2).
1
2
1
1
1
1
2
2
1
2
1
2
2