JVC KENWOOD Corporation 37313120 사용자 설명서
KENWOOD
CORPORATION
TK-8180-K2 FCC ID:K4437313120
IC:282F-37313120
LCD Display
No. Name
Description
1
Dot Matrix(12digits)
Alphanumeric display
Channel/GID display
Zone display
2
Dot Matrix(3digits)
Channel/GID display
Zone display OST list number display
3
Signal strength indicator
4
Monitor on display
5
Talk around display
6
Scan
display
7
Message
stack
display
8
Priority channel 1/2 display
9
Telephone
ID
display
10
Horn alert display
11
Option
board
display
12
Public
address
display
13
Zone
add
display
14
Auto Recording Display on VGS-1 option
15
Auto Reply Message Display on VGS-1 option
16
CH/GID add display
17
AUX
A
display
18
AUX
B
display
19
OST
display
TX/BUSY INDICATION
No. Name
Description
1 Red
TX
display
2 Green
Busy
display
3 Orange
Call
display
OPERATING BASICS
ATING
♦
Switching Power ON/OFF
Press the switch to switch the transceiver ON.
Press and hold the switch for approximately 1 second to switch the transceiver OFF.
Press and hold the switch for approximately 1 second to switch the transceiver OFF.
♦
Adjusting the Volume
The Volume Up/Down SW control to adjust the volume. You can adjust the volume up sw to increases the volume and
the volume down sw to decreases it.
the volume down sw to decreases it.
♦Selecting a Channel
The Channel Up/Down SW to select a channel.
The channel up sw the channel number increases and The channel down sw decreases it.
The Channel Up/Down SW to select a channel.
The channel up sw the channel number increases and The channel down sw decreases it.
♦Transmitting
Note: Before transmitting, first monitor the channel to make sure it is not already in use.
1 Select your desired channel.
• If the channel is busy, wait until it becomes free.
1 Press
the
microphone
PTT switch and speak into the microphone. Release
the PTT switch when you have finished speaking.
• For best sound quality at the receiving station, hold the microphone approximately 1.5 inches (3~4cm) from
your mouth.