JVC KENWOOD Corporation 39923220 사용자 설명서

38

Q A

You can set the transceiver to automatically respond to Individual Calls (while 
using FleetSync):

1 Press the key programmed as Auto Reply Message to enter Auto Reply 

Message mode.

2 When you receive an Individual Call, Auto Reply will begin after waiting for 

3 seconds, the transceiver will send an automatic response to the caller, 
and “GREETING” appears on the display.

• If you are available to receive the call, press any key to disable the auto 

response.

• If there is a channel available on your transceiver for recording, “I am not 

available. Leave your Message.” will be sent to the caller.  The caller can then 
leave a recorded message on your transceiver which you can later recall and 
listen to.  When a message is stored on your transceiver, “Msg Rcvd” appears on 
the display. 

• If there is no channel available on your transceiver for recording, “I am not 

available.” will be sent to the caller and “MEMORY FULL” appears on the display.

Q  P

To play back a recorded conversation, memo, or message:

1 Press the key programmed as Playback to enter Playback mode.

• If the last action on your transceiver was to auto record your conversation, 

“STORE?” will appear on the display, otherwise a memory channel with the 
time of the recording will appear.  To store the conversation record in the next 
available memory channel, press the PF 4 key.  To skip to the stored memory 
channels, press the PF 2 or DTMF

key.  To skip back 5 seconds, press the 

 key.  To skip ahead 5 seconds, press the GRP

 key.

2 Rotate the CH control or press the GRP

 and 

 keys to select the 

memory channel you want to play back.

• “RM” represents automated reply messages.
• “AR” represents conversation records.
• “VM” represents voice memos.

3 The transceiver will announce the channel, then the recording will 

automatically play back.

• When the entire recording has been played, “END OF MSG” (end of message) is 

displayed.

• To delete the selected recording, press the PF 3 or DTMF # key.  To clear all 

the recorded data, press and hold the PF 3 or DTMF #

NH\$FRQÀUPDWLRQ

message will appear on the display.  Press the PF 2 or DTMF

key to delete the 

recording(s) or the PF 3 or DTMF # key to cancel.

When changing the zone and/or channel, an audio voice will announce the new 
zone and channel number.  Additionally, when changing a function setting, an 
audio voice will announce the new setting.  (Voice announcements vary by dealer 
setting.)