JVC KENWOOD Corporation 407702 사용자 설명서
2
h
orn
A
lert
The Horn Alert function can only be used with an optional KAP-2 unit.
Press the key programmed as Horn Alert to toggle the Horn Alert function ON or
Press the key programmed as Horn Alert to toggle the Horn Alert function ON or
OFF.
• “HA” appears on the display while Horn Alert is activated.
BACKGROUND OPERATIONS
t
ime
-
out
t
imer
(tot)
The Time-out Timer is used to prevent you from using a channel for an extended
duration. If you continuously transmit for a preset time, the transceiver will stop
transmitting and an alert tone will sound. Release the PTT switch.
A
uxiliAry
p
ort
Press the key programmed as AUX to activate the auxiliary port. The auxiliary
port is used with optional boards.
d
iSplAy
b
rightneSS
You can toggle the display brightness between high and low by pressing the key
programmed as Display Brightness.
d
irect
Z
one
c
hAnnel
Press the key programmed as Direct Zone Channel to immediately select the
lowest channel of the lowest zone.
b
uSy
c
hAnnel
l
ockout
(bcl)
If BCL is set up by your dealer, you will be unable to transmit if the channel is
already in use. Use a different channel or wait until the channel becomes free.
ptt id
PTT ID is the transceiver unique ID code which is sent each time the PTT switch
is pressed and/or released.
c
ompAnder
If programmed by your dealer for a channel, the compander will remove
excessive noise from transmitted signals, to provide higher clarity of signals.
V
oice
A
nnouncement
When changing the channel, an audio voice will announce the new channel.