JVC KENWOOD Corporation 471200 사용자 설명서

12

Press [ ] to switch the transceiver ON.
Press [ ] again to switch the transceiver OFF.

Press the key programmed as [Volume Up] to increase the volume.  Press the 
key programmed as [Volume Down] to decrease the volume.

Select the desired zone and channel using the keys programmed as [Zone Up]/ 
[Zone Down] and [Channel Up]/ [Channel Down].

•฀ The฀transceivers฀may฀have฀names฀programmed฀for฀zones฀and฀channels.฀The฀zone฀

name and channel name can contain up to 16 and 14 characters respectively.  While 
selecting a zone, the zone name will appear above the channel name.

•฀ If฀programmed฀by฀your฀dealer,฀your฀transceiver฀will฀announce฀the฀zone฀and฀channel฀

numbers as you change them.

1  Select the desired zone and channel.
2  Press the PTT switch and speak into the microphone.  Release the PTT switch 

to receive.

•฀ The฀LED฀indicator฀lights฀red฀while฀transmitting฀and฀green฀while฀receiving฀a฀signal.฀

This indicator can also be disabled by your dealer.

•฀ For฀best฀sound฀quality,฀hold฀the฀microphone฀approximately฀1.5฀inches฀(3฀~฀4฀cm)฀

from your mouth.

Select the desired zone and channel.  If signaling has been programmed on the 
selected channel, you will hear a call only if the received signal matches your 
transceiver settings.