Wi Lan Inc EB03 사용자 설명서
Configuration
80
AWE 120-24 Installation & Configuration Guide
➧
To set base to repeater mode
1.
From the Main Menu, select Radio Module Configuration and press
Enter
. The Radio Module
Configuration menu is displayed.
2.
Select Repeater Mode and press
Enter
. The data field highlights.
3.
Scroll to select the desired setting where:
4.
Press
Enter
. The new setting is displayed in the "New" column.
5.
Select Reboot New RF Configuration and press
Enter
. The unit reboots and the AWE 120-24
Login menu is displayed. The unit now runs using the "Current" repeater mode for the amount of time
specified by the Current Test Minutes.
specified by the Current Test Minutes.
6.
To save the current setting(s) to flash memory, log in, go to the Main Menu, and select Radio Module
Configuration,
Configuration,
Save Current Config to Flash. See
7.
Press
Esc
to exit to the Main Menu.
off
Base unit does not re-transmit messages—default setting
on
Base unit re-transmits messages received from one remote to
other remotes in same RF group
other remotes in same RF group
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency 2.4400 GHz 2.4400 GHz 2.4400 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 0 0 0
Config Test Minutes (1-120) 30 30 30
Tx Power Level Adjust -> 0 dB 0 dB 0 dB
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1 1 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute