Yaesu Musen Co. Ltd. 20251X50 사용자 설명서

 

FT-2000 

Operating Manual 

Vertex Standard Co., Ltd. 

103

can set up your transceiver just the way you want to operate it. The Menu items are 
grouped by general utilization category, and are numbered from “001 AGc FST DLY” to 
“137 tGEn EMRGNCY.” 
 
Using the Menu 
1.  Press the [MENU] button momentarily, to engage the Menu mode. 

The Main (VFO-A) frequency display shows the Menu Number and Menu Group 
name, Sub (VFO-B) frequency display shows the Menu item, and the 
Multi-Display window shows the current setting of the current Menu item. 

2.  Rotate the Main Tuning Dial knob to select the Menu item you wish to work on. 
3.  Rotate the [SUB VFO-B] knob to change the current setting of the selected Menu 

item. 

4.  When you have finished making your adjustments, press and hold in the [MENU] 

button for two seconds to save the new setting and exit to normal operation. If you 
only momentarily press the [MENU] button, the new settings will not be retained. 

 
Menu Mode Reset 
You may reset all the Menu settings to their original factory defaults, if desired. 
1.  Turn the front panel [POWER] switch off. 
2.  Press and hold in the [MENU] button, and while holding it in, press the [POWER] 

switch to turn the transceiver back on. Now release the [MENU] button. 

 
AGC Group 
001 AGc FST DLY 
Function: Sets the delay time for the AGC FAST mode of the Main band (VFO-A) 
receiver. 
Available Values: 20 ~ 4000 msec (20 msec/step) 
Default Setting: 300 msec 
 
002 AGc FST HLD 
Function: Sets the hang time of the AGC peak voltage for the AGC FAST mode of the 
Main band (VFO-A) receiver. 
Available Values: 0 ~ 2000 msec (20 msec/step) 
Default Setting: 0 msec 
 
003 AGc MID DLY