Yaesu Musen Co. Ltd. 20251X50 사용자 설명서

 

FT-2000 

Operating Manual 

Vertex Standard Co., Ltd. 

126

 
118 tun AM STEP 
Function: Selects the tuning steps for the microphone’s [UP]/[DWN] keys in the AM 
mode. 
Available Values: 2.5/5/9/10/12.5 kHz 
Default Setting: 5 kHz 
 
119 tun FM STEP 
Function: Selects the tuning steps for the microphone’s [UP]/[DWN] keys in the FM 
mode. 
Available Values: 5/6.25/10/12.5/25 kHz 
Default Setting: 5 kHz 
 
120 tun FM DIAL 
Function: Setting of the Main Tuning Dial knob’s tuning speed in the FM mode. 
Available Values: 10/100 Hz 
Default Setting: 100 Hz 
 
121 tun MY BAND 
Function: Programs a band to be skipped while selecting bands using the [SUB VFO-B] 
knob. 
Available Values: 1.8 ~ 50/GE/AU 
Default Setting: AU 
To program the band to be skipped, rotate the [SUB VFO-B] knob to recall the band to 
be skipped while selecting bands via the [SUB VFO-B] knob, then press the [ENT] 
button to change this setting to “ON” (“d” notation will replace “E” notation). Repeat 
the same procedures to cancel the setting (skipped “Off”: “d” notation appears). 
 
TX AUDIO Group 
122 tAUd EQ1 FRQ 
Function: Selects the center frequency of the lower range for the parametric 
microphone equalizer. 
Available Values: OFF/100 ~ 700 Hz (100 Hz/step) 
Default Setting: OFF 
OFF: 

The equalizer gain and Q-factor are set to factory defaults (flat). 

100 ~ 700: You may adjust the equalizer gain and Q-factor at this selected audio