Yaesu Musen Co. Ltd. 20251X50 사용자 설명서

FT-2000

Operating Manual

Vertex Standard Co., Ltd.

“124 tAUd EQ1-BW”

“1” ~ “10”

“127 tAUd EQ2-BW”

“1” ~ “10”

“130 tAUd EQ3-BW”

“1” ~ “10”

Voice Memory (SSB/AM/FM mode)
You may utilize the Voice Memory capability of the FT-2000. The Voice Memory system
includes four memories capable of storing up to 20 seconds of voice audio each. The
maximum that any memory can hold is 20 seconds.

Recording Your Own Voice in Memory
1.  Select the LSB, USB, AM, or FM mode using the front panel [MODE] buttons.
2.  Press the [F5(MEM)] button. Blinked “REC” icon will appear in the display.
3.  Within five seconds of pressing the [F5(MEM)] button, press any of the buttons

numbered [F1(CH-1)] through [F4(CH-4)] to select that memory storage register. If
you do not press the PTT switch (see next step) within five seconds, the memory
storage process will be cancelled.

4. Press the microphone’s PTT switch, and speak into the microphone in a normal

voice level to record the message (such as “CQ DX, CQ DX, this is W 6 Delta X-Ray
Charlie, W 6 Delta X-Ray Charlie, Over”). Remember that the time limit for
recording any message is 20 seconds.

5. Press the [F5(MEM)] button to terminate the message storage process.

Checking Your Recording
1. Be sure that the front panel [MOX] button is “Off.” (The LED imbedded in the

switch is turned off.)

2. Press the [F1(CH-1)] ~ [F4(CH-4)] button (whichever one you just recorded in), and

you will hear the contents of the voice memory you just recorded.

Advice:
You may rotate the main [AF GAIN] knob to adjust the playback level of the recording.

Transmitting the Recorded Message
1.  Select the LSB, USB, AM, or FM mode using the front panel [MODE] buttons.
2.  Press the front panel’s [VOX] button.
3.  Press the FH-2 [F1(CH-1)] ~ [F4(CH-4)] button, depending on which memory