Yaesu Musen Co. Ltd. 20251X50 사용자 설명서
FT-2000
Operating Manual
Vertex Standard Co., Ltd.
94
C-1) will be over-written on a first-in, first-out basis.
QMB Channel Recall
1. Press the [QMB(RCL)] button. The display will indicate “QMB” and the current
QMB Channel Recall
1. Press the [QMB(RCL)] button. The display will indicate “QMB” and the current
QMB channel’s data will be shown on the Main (VFO-A) frequency display field.
2. Repeatedly pressing the [QMB(RCL)] button will toggle you through the QMB
channels: C-2 C-3 C-4 C-5 C-1.
Press the [V/M] button to return to the VFO or Memory mode.
Advice:
Rotating the Main Tuning Dial knob, or changing the operating mode, will place the
transceiver in the “Memory Tune” mode, which is a temporary “pseudo-VFO” method of
tuning off of a stored memory channel. If you do not over-write the contents of the
current memory channel, the original contents will not be disturbed by the initiation of
Memory Tune operation.
Memory Groups
Memory Group Assignment
1. Press the [MENU] button to enter the Menu mode.
2. Rotate the Main Tuning Dial knob to select Menu item “030 GEnE MEM GRP.”
3. Rotate the [SUB VFO-B] knob to set this Menu item to “On” (the default setting is
Advice:
Rotating the Main Tuning Dial knob, or changing the operating mode, will place the
transceiver in the “Memory Tune” mode, which is a temporary “pseudo-VFO” method of
tuning off of a stored memory channel. If you do not over-write the contents of the
current memory channel, the original contents will not be disturbed by the initiation of
Memory Tune operation.
Memory Groups
Memory Group Assignment
1. Press the [MENU] button to enter the Menu mode.
2. Rotate the Main Tuning Dial knob to select Menu item “030 GEnE MEM GRP.”
3. Rotate the [SUB VFO-B] knob to set this Menu item to “On” (the default setting is
“OFF”).
4. Press and hold in the [MENU] button for two seconds to save the new setting and
exit. Operation will now be restricted to the six Memory Groups.
To cancel Memory Group operation, repeat steps (1) through (4) above, choosing “Off”
in step (3).
Advice
Note that for the PMS memory group, the PMS memories “P1L” through “P9U” will be
so designated, so as to avoid confusion.
in step (3).
Advice
Note that for the PMS memory group, the PMS memories “P1L” through “P9U” will be
so designated, so as to avoid confusion.
Memory Channel Number
Group Memory “OFF”
Group Memory “ON”
01 ~ 19
1-01 ~ 1-19
20 ~ 39
2-01 ~ 2-20
40 ~ 59
3-01 ~ 3-20
60 ~ 79
4-01 ~ 4-20
80 ~ 99
5-01 ~ 5-20