Yaesu Musen Co. Ltd. VX-150 사용자 설명서

•

 Jack

This SMC jack accepts the supplied YHA-

 rub-

ber flex antenna, or any other antenna designed to
provide 50-ohm impedance on the 2m band.

‚

 Control

This control adjusts the volume of the receiver. Turn
this control to the fully counterclockwise position
(into the click stop) to turn the transceiver OFF.

ƒ

 Rotary Selector

This 20-position detented rotary switch tunes the
operating (or CTCSS tone) frequency or selects the memory channels, according to
which function is selected by the keys on the front panel. This knob duplicates some of
the functions of the up and down arrow keys for operating convenience.

„

 Control

This control sets the threshold level at which received signals (or noise) open the noise
squelch. Set this control from counterclockwise just to the point where noise is si-
lenced (and the BUSY/TX indicator on the front panel is off) when the channel is
clear.

…

 Indicator Lamp

This LED indicator glows green when the noise squelch is open during reception, and
red when transmitting.

†

 (Liquid Crystal Display)

The display shows the selected operating conditions as indicated in the following dia-
gram:

S- and TX Power Meter

Auto Power OFF Active

LOCK Feature Active

LOW Power

Alt Key Active

Memory Number

or

VFO Selection

Tone Encoder/Squelch Enabled

Digital Coded Squelch

DTMF Memory Mode

Memory Skip

BELL

Priority Channel Scanning

Repeater Shift

Memory Mode

Frequency