Radicom Research Inc RB4000 사용자 설명서
Important Regulatory Compliance and User Information
The final product with the modules installed needs to be tested for FCC Part 15, IC
(Industry Canada) CE, EMI/RFI compliance. Radicom certification documentation will
help streamline the final product approval process. Contact Radicom for more
information. To maintain compliance in the finished product, carefully follow guidelines
in this section. This device is intended only for OEM integrators under the following
condition:
The transmitter module may not be co-located with any other transmitter or antenna. As
long as this condition is met, further transmitter testing will not be required. However, the
OEM integrator is still responsible for testing their end product for any additional
compliance requirements required with the module installed (for example, digital device
emissions, PC peripheral requirements, etc). IMPORTANT NOTE: In the event that
this condition cannot be met then the FCC authorization is no longer considered valid and
the FCC ID cannot be used on the final product. In these circumstances, the OEM
integrator will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
Host (End Product) Labeling Requirements
To maintain compliance, the end product hosting the module must be properly labeled to
identify that this module is installed. The final end product must have a label located in a
visible area with the following information:
identify that this module is installed. The final end product must have a label located in a
visible area with the following information:
XXXXXXX is for the model of the RB400HM used in the end equipment. The
XXXXXXX will be RB4000, H4000CE
.
RB4000HM-a or RB4000HM-c. The label shall
be securely affixed to a permanently attached part of the device, in a location where it is
visible or easily accessible to the user, and shall not be readily detachable. The label shall
be sufficiently durable to remain fully legible and intact on the device in all normal
conditions of use throughout the device’s expected lifetime. These requirements may be
met either by a separate label or nameplate permanently attached to the device or by
permanently imprinting or impressing the label directly onto the device. The label text
shall be legible without the aid of magnification, but is not required to be larger than 8-
point font size.
visible or easily accessible to the user, and shall not be readily detachable. The label shall
be sufficiently durable to remain fully legible and intact on the device in all normal
conditions of use throughout the device’s expected lifetime. These requirements may be
met either by a separate label or nameplate permanently attached to the device or by
permanently imprinting or impressing the label directly onto the device. The label text
shall be legible without the aid of magnification, but is not required to be larger than 8-
point font size.
8
Contains Transmitter
Module
Model: XXXXXXX
FCC ID: K7T-RB4000
IC: 2377A-RB4000
IC: 2377A-RB4000