Pony Electric Corporation 8TQMT-300 사용자 설명서

22 

 

NOTE 

DSC calls will NOT be received when the radio is receiving or send-

ing out a transmission. During scanning, Ch. 70 is monitored on an 

allocated time-slot basis and DSC calls will be received. 

GPS Operation 
Your radio is NMEA 0183 compatible, which means it can work with a 

GPS unit. To be certain your location is autom+atically transmitted 

during a distress call, make sure your GPS unit is on and operational 

at all times. The GPS data is sent through Ch. 70 to the coast guard 

and is the primary starting point of any search and rescue mission. If 

 is blinking, the GPS data is not valid. 

 

H/L 
The 

 key gives you control over the radio's wattage. The high-end is 

25 Watts. The low-end is 1 Watt. If the 

 is off, the radio 

will transmit at 25 Watts. Some channels do not accept transmissions 

or are restricted to a 1-Watt level. If you come across one of those chan-

nels and you try to switch to 25W, you will hear a 3-tone error beep, 

meaning you either can not transmit on that channel or it only accepts 

transmissions at the 1W (Lo) level. 

 

Memory Operation 
Normally, the 

 appears on the display to alert the user 

the channel is stored in the memory channel list. The following figure 

shows Ch. 8 is stored in memory.