Boston Scientific Corporation CRM312004 사용자 설명서
17
In some screens (e.g., Patient Data screens), data are not displayed in
Present and Change columns. These screens display value boxes that re-
quire unique data to be entered. Typically, the data are entered from a
keyboard window (as shown in Figure 8). The values entered will remain
in the value boxes when programmed; they will not move from a Change
column to a Present column.
Present and Change columns. These screens display value boxes that re-
quire unique data to be entered. Typically, the data are entered from a
keyboard window (as shown in Figure 8). The values entered will remain
in the value boxes when programmed; they will not move from a Change
column to a Present column.
Keyboard Window: Touch the first character of the new value; it will ap-
pear in the data-entry box in the graphic keyboard. Continue until the en-
tire new entry appears in the box. To delete one character at a time, start-
ing with the last character, select the left arrow key on the graphic key-
board. Each time the left arrow key is selected, a character will be deleted
in the box. To cancel any deletions or additions just made, select the Can-
cel Changes button. When all the appropriate characters have been se-
lected, select the Close button on the graphic keyboard.
pear in the data-entry box in the graphic keyboard. Continue until the en-
tire new entry appears in the box. To delete one character at a time, start-
ing with the last character, select the left arrow key on the graphic key-
board. Each time the left arrow key is selected, a character will be deleted
in the box. To cancel any deletions or additions just made, select the Can-
cel Changes button. When all the appropriate characters have been se-
lected, select the Close button on the graphic keyboard.
NOTE: If, when the graphic keyboard initially appears, it contains data in
the value box, select the Clear button to delete all the characters in the
value box.
the value box, select the Clear button to delete all the characters in the
value box.
Copy button: On screens that contain a Copy button, you can simply
copy parameter values from one screen to another. Select the Copy but-
ton. A window will appear with a Copy From column and a Copy To col-
umn, with buttons below the columns. Select the desired buttons in both
columns, and then select the Copy button.
copy parameter values from one screen to another. Select the Copy but-
ton. A window will appear with a Copy From column and a Copy To col-
umn, with buttons below the columns. Select the desired buttons in both
columns, and then select the Copy button.
To program the device, follow the instructions in the System Guide for the
Guidant pulse generator being interrogated.
Guidant pulse generator being interrogated.
NOTE: If additional parameters require reprogramming, repeat these
steps. Multiple parameter changes can be programmed at one time
(batch programming).
steps. Multiple parameter changes can be programmed at one time
(batch programming).
MAINTENANCE AND HANDLING
Loading the Paper
The internal printer/recorder uses four-inch wide (110 mm) thermosensi-
tive printing paper. Model 6979 Printer Paper refills can be ordered from
Guidant.
tive printing paper. Model 6979 Printer Paper refills can be ordered from
Guidant.
Use the following procedure to load paper into the internal printer/
recorder:
recorder: