Guangzhou Panyu Juda Car Audio Equipment Co. Ltd. 4000774 사용자 설명서

retro

bluetooth

speaker

We hope you enjoy your REALISTIC Retro Bluetooth

Speaker with elegant cherry wood finishing to provide

stunning sound. Please read this user's guide before using

your new speaker.

Package Contents

• Speaker

• AC Power cable

• 3.5mm audio cable

• User’s Guide

WARNING: To reduce the

risk of fire or shock hazard,

do not expose this product

to rain or moisture.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER OR BACK. NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

The lightning symbol is intended to alert you to the presence of

uninsulated, dangerous voltage within this product’s enclosure

that might be of sufficient magnitude to constitute a risk of

electric shock. Do not open the product’s case.

The exclamation symbol is intended to inform you that

important operating and maintenance instructions are

included in the literature accompanying this product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETy INSTRUCTIONS

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all Instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

10. Only use attachment/accessories specified by the

manufacturer.

11. Unplug this apparatus during lightning storms or

when unused for long periods of time.

12. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

13. Water and Moisture: This product should be kept

away from direct contact with liquids. The apparatus

shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases, shall

be placed on the apparatus.

WARNING: To reduce

the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

14. Caution: This product uses a built-in battery. Batteries

shall not be exposed to excessive heat such as

sunshine, fire, etc.

15. Where the mains plug or an appliance coupler is used

as the disconnect device, the disconnect device shall

remain readily operable.

16.

This equipment is a Class II or double-

insulated electrical appliance. It has been

designed in such a way that it does not require

a safety connection to electrical earth.

4000774

User’s Guide

3. Use the controls on your device, or the playback

buttons on the speaker to play music.

Notes:

• The speaker will disconnect and power down from your

device if they are too far apart, or left idle. To reconnect,

move the speaker/ device within Bluetooth connection

range, within 15 minutes.

• Function of speaker playback buttons may vary

depending on compatibility with your actual Blueooth

device.

Reset Bluetooth Pairing

Normally, your speaker automatically reconnects to the

most recently paired device when switched on.
If you want to change to other Bluetooth devices, or have

difficulty pairing to a new device, or experience problems

reconnecting your current device, do the following:

• In Bluetooth pairing mode, press and hold F/J for

3 seconds. You will hear an audio double tone (a low

and a high note). This indicates the speaker is now

successfully reset. Any previously paired devices are

now cleared from the speaker's Bluetooth memory.

Connecting with AUX IN

For device players without Bluetooth functionality, use

the included ⅛" (3.5mm) audio cable to connect to the

speaker’s

AUX IN jack. The speaker's AUX IN LED lights up

green during connection.
Note:

• Bluetooth functionality is automatically deactivated

when

AUX IN is connected.

• The speaker playback control buttons ; / and F/J

are only valid in Bluetooth mode.

ON/OFF
Turn on/ off speaker

F/J (Bluetooth mode and devices only)

• Press once or more to skip to the next track(s)
• Press and hold 3 seconds to skip to previous track

; / (Bluetooth mode and devices only)

• Play/ pause tracks
• Activate Bluetooth mode to start searching pairing

a Bluetooth device

• Press and hold 3 seconds to disconnect Bluetooth

connection

LEDs
bLUETOOTh

• flashes quickly − pairing
• flashes slowly − out of range
• lights steadily − connected

AUX IN lights green when line-in cable connected
bATTERY

• Lights red during charging
• Flashes slowly when battery low

VOLUME, bASS, TREbLE
Volume and sound controls

Top Panel Controls

Troubleshooting

No sound/power

• Make sure the built-in battery is fully charged using the

supplied AC power cable. Alternatively, use the cable to

power and operate the speaker directly.

• Check and turn up the volume on the speaker and your

audio source.

• If using AC power, check your cable is properly connected.

Sound distorted

• Adjust the bass and treble controls.

FCC Information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for

help.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

AUX IN

For line-in listening option

bACK VIEW

Subwoofer air port

AC IN
Connect the included AC power cable here

and to an AC mains outlet to charge the

speaker's built-in battery, or to power the

speaker directly.

To AC outlet

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Limited Warranty

Go to www.radioshack.com/help for details.

RadioShack Customer Relations

300 RadioShack Circle, Fort Worth, TX 76102

17. No naked flame sources, such as lighted candles,

should be placed on the apparatus.

18. Batteries should be recycled or disposed as per state

and local guidelines.

19. The ventilation should not be impeded by covering

the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc.

20. Allow at least 10cm distances around the apparatus

for sufficient ventilation.

21. Use of the apparatus in moderate climates only.

Specifications

Power supply .......................................AC ~100-240V, 50/60Hz
Power consumption ............................................................... 25W
Battery ...................14.8V, 2000mAh, 29.6W lithium polymer
Battery Charging Time ......................................approx. 4 hours
Playtime ..............................up to 16 hours at medium volume
Frequency Response .......................................... 45 Hz – 20KHz
2.1 Output (max.) ............ 5 W x 2 tweeters, 15W subwoofer
S/N ratio .................................................................................... 70dB
Impedance ...........................................................................4 Ohms
Drivers ....0.75" neodymium tweeters, 4" ferrite subwoofer
Bluetooth Protocol ................................................V2.1 with EDR
Dimensions (H x W x L) .........................................5.5 x 9.5 x 5.5"
Speaker weight ................................................................... 5.51 lbs
Operation Range......................................................................33 ft

Specifications are subject to change and improvement without

notice. Actual product may vary from the images found in this

document.

Power / Charge your Speaker

1. Connect the supplied power cable to the AC IN jack

and a standard mains wall outlet.

• The

bATTERY LED lights red during charging and

turns off when fully charged.

2. Unplug the cable after charging.

Notes:

• For best sound performance, fully charge the speaker before

use, or when you hear the "Battery low" voice prompt, or the

bATTERY LED flashes slowly.

• The supplied power cable can also be used to directly power

the speaker.

Lithium battery Notes:

• Charge batteries on a fireproof surface away from flammable

items or liquids. Follow the instructions for charging the

speaker and do not charge longer than recommended.

• Recycle lithium batteries. Do not dispose of them in the

trash. Do not burn or bury batteries. Do not puncture or

crush. Do not disassemble.

• If the electrolyte in the cells should get on your skin,

thoroughly wash with soap and water. If in the eyes, rinse

thoroughly with cool water. Immediately seek medical

attention.

Connecting to a Bluetooth Device

1. Press the ON/OFF button to turn on the speaker.

• The LED flashes blue quickly as your speaker searches

for Bluetooth devices.

2. Activate your device’s Bluetooth function (refer to

your device’s user’s guide). When your device locates

Realistic Retro, select this from the device list. If your

smartphone requires a password, enter 0000. When

paired, the indicator lights blue steadily.

Complies with the European Union’s “Restriction

of Hazardous Substances Directive,” which

protects the environment by restricting specific

hazardous materials and products.

registered trademark used by General

Wireless Operations Inc. dba RadioShack.

radioshack.com

The Bluetooth

word mark and logos are owned by

Bluetooth SIG, Inc. and any use of such marks by

General Wireless Operations Inc. is under license.

09A16

4000774

Printed in China

4000774_UG_Eng.indd 1-10

9/9/2016 4:09:52 PM