VTech Telecommunications Ltd 80-1318-00 사용자 설명서
Congratulations
on purchasing your new VTech product.
Before using this product, please read
Important safety instructions.
Before using this product, please read
Important safety instructions.
This manual has all the feature operations
and troubleshooting necessary to install and
operate your new VTech product. Please
review this manual thoroughly to ensure
proper installation and operation of this
innovative and feature rich VTech product.
and troubleshooting necessary to install and
operate your new VTech product. Please
review this manual thoroughly to ensure
proper installation and operation of this
innovative and feature rich VTech product.
What’s in the box
Connect and charge the
battery
battery
NOTES
The rechargeable battery is pre-installed in your
parent unit.
Use only the power adapters supplied with this
Use only the power adapters supplied with this
product.
Make sure the electrical outlets are not controlled
Make sure the electrical outlets are not controlled
by wall switches.
The power adapters are intended to be correctly
The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
if they are plugged into a ceiling, under-the-table
or cabinet outlet.
Make sure the parent unit, the baby unit and the
Make sure the parent unit, the baby unit and the
power adapter cords are out of reach of children.
Connect the baby monitor
•
•
•
•
•
Charge the parent unit battery
When you have connected and turned on
and turned on
the parent unit, the battery will be charged
, the battery will be charged
automatically. The battery icon indicates the
battery status (see the following table).
NOTES
The parent unit battery is fully charged after
11 hours of continuous charging.
It takes longer to charge the battery when the
It takes longer to charge the battery when the
parent unit is turned on. To shorten the charging
time, turn the parent unit off while charging.
The standby time varies depending on the
The standby time varies depending on the
volume level you set and your actual use.
Battery
indicators
Battery
status
Action
The screen
displays
Battery low
at Parent
Unit
. The
or
light flashes.
The battery
has very little
charge and
may be
used
for only a
short time.
Charge
without
interruption
(about
30 minutes).
The battery
icon
becomes
solid
.
The battery is
fully charged.
To keep
the battery
charged,
connect it to
AC power
when not in
use.
•
•
•
Before use
NOTES
This baby monitor is intended as an aid. It is not a
substitute for proper adult supervision, and should
not be used as such.
Test your baby monitor
You may test the baby monitor before initial
use, and at regular times thereafter.
use, and at regular times thereafter.
CAUTION
For hearing protection, make sure the
parent unit is more than 3 feet (1 meter)
away from both baby units. If you hear any
high-pitched noise, move the parent unit
further until the noise stops. You can also
press
VOL on the parent unit to lower or
mute the noise.
Make sure your baby unit and parent unit
are on.
The parent unit displays images from the
The parent unit displays images from the
baby unit.
Speak towards the microphone of the
baby unit. You will hear the sound at the
parent unit.
If you have two baby units, view the image
from one of them by switching cameras via
menu. Then, repeat step 2.
NOTES
When the parent unit displays
No link to
Camera, and the POWER LED light flashes,
move the parent unit closer to the baby units
(observe the minimum distance of 3 feet /
1 meter). You can also check if the baby
monitor is connected to a live power socket
and switched on.
TIP
Increase the speaker volume of the parent unit if
you cannot hear the sounds transmitted from the
baby units.
•
•
1.
2.
•
3.
•
•
Positioning the baby monitor
CAUTION
Keep the baby unit out of the reach of your baby.
Never place or mount the baby unit inside the
baby’s crib or playpen.
NOTE
To avoid interference from other electronic
devices, place your baby monitor far away from
devices such as wireless routers, microwaves,
cell phones and computers.
Place the baby units more than 3 feet
(1 meter) away from your baby.
(1 meter) away from your baby.
Place the parent unit more than 3 feet
(1 meter) away from the baby units.
(1 meter) away from the baby units.
Adjust the angle of the baby unit camera to
aim at your baby.
aim at your baby.
CAUTION
The default volume of your parent unit is level 3.
If you experience high-pitched screeching noise
from your baby monitor while positioning:
Make sure your baby units and parent unit are
more than 3 feet (1 meter) apart, OR
Turn down the volume of your parent unit.
Turn down the volume of your parent unit.
•
•
1.
2.
3.
•
-
-
Operating range
The operating range of the baby monitor is
up to 1000 feet (300 meters) outdoors or
160 feet (50 meters) indoors. The actual
operating range may vary depending on
the environmental conditions and other
interferences such as walls, doors and other
obstructions.
Overview
Baby unit overview
1
PAIR button
2
Power indicator
On when the baby unit is turned on
and is paired to the parent unit.
Flashes when the baby unit is not
Flashes when the baby unit is not
being viewed; or when the link to the
parent unit is lost.
•
•
3
Microphone
4
Camera
5
Light sensor
6
ON/OFF switch
Slide to turn on or off the baby unit.
•
7
Speaker
8
Power jack
Connects with AC power adapter.
•
Parent unit overview
1
Power indicator
Green when the parent is powered on.
Flashes green when no link to camera.
Flashes green when no link to camera.
•
•
•
2
TALK
Press and hold to talk to the selected
baby unit in
SINGLE-CAM or
PATROL mode.
•
3
MENU/SELECT
Press to enter or exit the menu.
While in a sub-menu, press to
While in a sub-menu, press to
choose an item, or save a setting.
•
•
•
4
Arrow keys and VOL / VOL
VOL
• Press to increase the parent unit
speaker volume.
While in a menu, press to scroll up,
While in a menu, press to scroll up,
or to enter an item’s sub-menu.
While zooming in
While zooming in
SINGLE-CAM or
PATROL mode, press and hold to
move the zoomed image upward
VOL
• Press to decrease the parent unit
speaker volume.
While in a menu, press to scroll
While in a menu, press to scroll
down.
While zooming in
While zooming in
SINGLE-CAM or
PATROL mode, press and hold to
move the zoomed image downward.
•
•
•
•
While in a menu, press to choose the
next item on the left.
While zooming in
While zooming in
SINGLE-CAM and
PATROL mode, press and hold to
move the zoomed image leftward.
While in a menu, press to choose the
next item on the right.
While zooming in
While zooming in
SINGLE-CAM or
PATROL mode, press and hold to
move the zoomed image rightward.
•
•
•
•
5
MIC
6
Battery indicator
Red when battery is charging.
Flashes red when battery is low.
Flashes red when battery is low.
•
•
•
7
Visual sound indicator
The visual sound indicator can show
the sound level detected by the baby
unit.
Sound level detected by the baby
Sound level detected by the baby
unit
One to three green
lights indicate a moderate sound level
detected by the baby unit.
Additional red
lights indicate a higher sound level
detected by the baby unit (e.g. baby
crying loudly).
•
•
8
Zoom
Press to zoom in or out while viewing
image in
SINGLE-CAM or PATROL
mode.
•
9
Main screen
10
Speaker
11
Stand
12
ON/OFF switch
Slide to turn on or off the parent unit.
•
13
Power jack
Parent unit status icons
Connection status
or
displays when
strong signal strength is detected
between the baby unit and the
parent unit.
or or displays when
moderate or low signal strength
is detected between the baby unit
and the parent unit.
displays when the link between
the baby unit and the parent unit
is lost.
•
•
•
Patrol mode
Displays when the parent unit is in
PATROL mode.
•
or
or
or
Current view status
Displays the baby unit number that
is being viewed when in
SINGLE-CAM or PATROL mode.
•
Zoom
Displays when the camera at the
baby unit has zoomed in.
•
Night vision
Displays when the baby unit being
viewed has activated the night
vision feature.
•
Mute alert
Displays when the parent unit
speaker volume is set to off.
•
or
Real-time temperature
Displays the real-time temperature
detected by the baby unit in
Fahrenheit (
o
F) or Celsius (
o
C)
(e.g.
57
o
F or 14
o
C).
•
Battery status
animates
when the battery is charging.
displays solid when the
battery is fully charged.
displays when the battery is
low and needs charging.
•
•
•
Speaker volume
Displays the parent unit speaker
volume level while adjusting.
•
Parent unit main menu icons
Monitoring mode
You can enter the monitoring mode
You can enter the monitoring mode
to view the video from the baby
unit.
Brightness
You can change the brightness of
You can change the brightness of
the parent unit screen.
LCD screen off timer
You can set a specific time to turn
You can set a specific time to turn
the screen off.
VOX Sensitivity
With this feature, you can choose
With this feature, you can choose
to hear sounds from the baby unit
all the time, or to hear sounds that
exceed a certain level. You can
use the parent unit to adjust the
microphone sensitivity of your baby
unit. The higher the sensitivity level,
the more sensitive the baby unit is
in detecting sounds for transmitting
to the parent unit.
Sound-activated screen
Automatically turns on the
Automatically turns on the
parent unit screen when a baby
unit detects a sound after the
screen is turned off. When no
sound is detected, the screen is
automatically off to save power.
Temperature
You can turn on the temperature
You can turn on the temperature
alert tone so that the parent
unit beeps whenever the room
temperature detected by the baby
unit falls outside of the desired
temperature range.
You can also set the temperature
You can also set the temperature
format to display the real-time
temperature in baby’s room,
or set the maximum/minimum
temperature limit for alerts.
Parent unit warning icons and
messages
/No link to
Camera
The selected baby unit is
out of range or is turned
off.
/Battery low
at Parent Unit
The battery is empty and
needs to be recharged.
The parent unit is
searching for baby units.
/Temperature
too high
or
or
/Temperature
too low
The temperature
detected by the baby unit
is higher/lower than the
desired temperature alert
range.
The parent unit is
searching for baby units.
* #
represents the selected baby unit number.
Using the baby monitor
Power on or off the baby unit
Slide the
ON/OFF switch up to turn on
the baby unit. The
POWER LED light turns
on.
Slide the
Slide the
ON/OFF switch down to turn
off the baby unit. The
POWER LED light
turns off.
Power on or off the parent unit
Slide the
ON/OFF switch to ON to turn
on the parent unit. The screen and the
POWER LED light turns on.
Slide the
Slide the
ON/OFF switch to OFF turn
off the parent unit. The screen and the
POWER LED light turns off.
Adjust parent unit speaker volume
Press
VOL /VOL on the parent unit to
adjust the speaker volume
.
NOTE
When the parent unit speaker volume is set to off,
appears on the screen.
•
•
•
•
•
•
Adjust LCD brightness
You can change the brightness of the parent
unit screen from
Level 1 to Level 5. The LCD
brightness is preset to
Level 3.
Press
when the parent unit is idle.
Press or to choose
, then press .
Press or to choose the desired level of
brightness, then press
brightness, then press
to confirm your
selection.
Monitoring mode
Every time the parent unit is turned on, it
displays a baby unit in
SINGLE-CAM mode.
If there are more two baby units in your
system, you can also monitor your baby in
PATROL mode.
SINGLE-CAM
The screen displays
image of a single baby
unit in full screen.
PATROL
A single cam view that
transits to a different baby
unit every 10 seconds.
Change monitoring mode
To change the monitoring mode from
SINGLE to PATROL mode:
SINGLE to PATROL mode:
Press
to enter the main menu.
Press or to choose
, then press to
open the submenu.
Press or to select to enter
Press or to select to enter
PATROL
mode to alternately view the image from
one baby unit to the next one in every 10
seconds.
one baby unit to the next one in every 10
seconds.
To change the monitoring mode from
PATROL to SINGLE mode:
PATROL to SINGLE mode:
Press
to enter the main menu.
Press or to choose
, then press to
open the submenu.
Press or to select a camera number to
enter
Press or to select a camera number to
enter
SINGLE mode.
1.
2.
3.
2.
3.
1.
2.
2.
3.
1.
2.
2.
3.
NOTE
If one or more paired baby units are powered off
or disconnected during patrolling, the parent unit
will keep searching until its power has run out or
a baby unit is connected once again
Screen off timer
You can set the screen off time for the parent
unit so that the screen will be automatically
turned off after it is idle for a specific time
interval. When the screen is turned off, you
can still hear sound from the baby unit.
Press
to enter the main menu when
the parent unit is idle.
Press or to choose
Press or to choose
, then press to
open the submenu.
Press or to choose the desired time
Press or to choose the desired time
period to automatically turn off screen
(
/ - 5 min./ - 30 min. / - 60min.),
then press
to confirm your selection
and return to idle screen.
VOX (sound-activated)
sensitivity
You can choose to hear sounds from the
baby unit all the time, or to hear sounds that
exceed a designated level. You can use
the parent unit to adjust the microphone
sensitivity of your baby unit. The higher the
VOX sensitivity level, the more sensitive
the baby unit is in detecting sounds for
transmitting to the parent unit. The VOX
sensitivity level is preset to the highest level
(
Level 5).
•
1.
2.
3.
BC
User’s manual
VM2251
VM2251-2
Video Monitor
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
to register your product for
enhanced warranty support and
the latest VTech product news.
> 3ft (1m)
2
3
4
4
7
8
9
5
6
6
1
10
13
12
11
>
3 feet (1meter)
<3ft (1m)
>3ft (1m)
1
3
4
5
5
8
9
2
6
7
1 set for VM2251
2 sets for VM2251-2
2 sets for VM2251-2
1
3
4
5
5
7
8
2
6