Itron Inc. 500GR 사용자 설명서

Appendix B Optional sealant application
instructions

In areas where insect intrusion is a problem, Itron recommends an optional sealant to help
keep insects out of the ERT module housing. The Itron-tested and approved sealant (Itron
part number ADH-5106-000) is used to seal gaps in remote ERT module installations that
can allow insect intrusion.

1. Prepare the module for the sealant by verifying

the application area is clean and dry.

Warning: Apply sealant in a well-
ventilated area.

2. Itron recommends sealant application after the

remote module is installed so the cable is in the

installation position. Use the sealant

(ADH-5106-000) to fill the gap.

3. Use enough sealant to fill the gap. Wipe off

any excess sealant and replace the cover on the

sealant tube.

OpenWay Riva 500G Gas ERT Module Installation Guide, Remote Mount TDC-1678-000

72